small

please delete figured it out

Hi, I have just become the proud owner of a 1997 FE400 which I intend to race in the evo class at vinduro events. I'm in the process of getting it set up but I've just noticed a small hole at the back of the water pump housing. It doesn't appear to be threaded so I'm not sure what it's all...

After filling the coolant up i realized that there was a small hole in the waterpump area leaking coolant and i don't know why, is there anyone who knows what this hole is then please tell me. It's a Husaberg Fe400 1998

Does anyone have a part # or vehicle application for the 20 x 22 x 18mm con rod bushing?

I posted this in my new to FE570 thread but thought I might get more eyes on it here. I have a brand new issue. I think it's a fuel issue based on some research and tips from Rainerio on here. About 5 times in a few hours, mostly on downhills in 2nd gear and engine breaking or just...

Looking for recommendations for a small tank bag for holding tools that won't interfere with me being able to get forward on the bike for steep climbs. Looking at the Wolfman enduro bag...? Anyone have any pics of a small tank bag on their Husa that works good for dirt riding? *Don't...

The bike is an '09 FE570, 1 size stiffer springs front and rear (PDS 7 progressive), otherwise the suspension is stock. My bike rides great but on high speed forest roads (30-50mph) the smallest bumps are incredibly harsh, and painful! I thought this was normal but my friends KTM 505 does not...

I need a radiator hose but the dealer is only offering the entire OEM assembly (3 hoses and thermostat housing) Part # 81235013144 http://cyclebuy.com/husaberg/husaberg_pdf/2010_FE390.pdf. I only need the small hose with 2 90 degree turns attached to the bottom of thermostat housing...

2006 FE450E is dual sported with factory dual sport kit without key switch. The light switch is off/low/high, the small light only works with high or low beam, shouldn't the light be on when the engine is running regardless of the light switch position. Any idea where to look???

I have a 08 FE 450 with a converted stator for xenon lights. The old battery is dead and I was hoping to save some weight by using a 4 cell Ballistic battery (http://www.ebay.com/itm/Ballistic-Lithi ... 830wt_1139). The bike is easy to start on the kickstart so I don't really need a lot of power...

hi, does anyone know how i could remove the small, small bearings that sits in the engine and the clutch housing and holds the starter clutch

The new Tiny Damper looks great, but there is no information as to the performance, does anyone know if it dampens back to center ??? or who actually makes it for them ? Thanks

Hi Guys, A quick question...I want to replace shortly my tail light set up...it's a very small LED unit and I figure it has to be a Genuine Berg product but can't seem to lovate any info on it... Secondly the smart money would be to put a picture of it on the website...but my...

as it states a above, looking for a tank 06 style must be small type 7.5 litres alu or plastics. uk

Too many herbs for me just wearing me out. is there anything out there that can covert it too say a 400 for egsample?

Hi all my fe400 stopped the other day and i am unable to get it going again all that i can see is that the spark from the plug is very small and some times not there. I have a 5K ohms resistor cap and a standard NKG DCPR8E plug i know the plug is right should i have a resistor cap like this on...

Just noticed a small crack in the front rhs engine mount (ally?) plate. it hasnt gone all the way down the plate but it is at least 1/3 of the way down. is this a common problem ? Could there be an underlying cause of this or is it something i shouldnt worry too much about and just replace it ...

http://adbmag.com/ContentItem.aspx?ContentID=3208

Should I worry about this? They are not magnetic so its alu.. about 15 to 20 very small particles sorry for the blurry pics

Hi, I have a small hole (3\4mm diameter) behind the waterpump carter. I discovered this small hole because today i saw the carter near the oil level porthole was dirty and I cleaned it two days ago. So i noticed that some dirty comes out from this hole. So...is that normal? why is it there...