slip

Let me know

Anyone know if a certain year KTM exhaust Slip on or full exhaust that will fit a 2011 450 FE Burg? Really would like to put the FMF 4.1 Blue anodized with carbon end cap on it. Just dont want to order wrong one and it not fit. I dint mind a small amount of fabing if needed. Just dont want it...

I have an 09 450 with an akropovic slip on. Whenever I pick up the bike there is a noticeable clunk which, after inspection, is the slip on shifting at the mid pipe connection. This appears to have started recently as I have not noticed this before. The only change is I replaced the carbon...

hello everyone My FE600E after the shock absorption. These days, electric start idling, disassemble the engine, electric starter one-way clutch is broken, replace parts? Help me, thank you.

Hi! Bike: 2007 FS650-e supermotard When the season ended here in Norway:cold: I decided to open the clutch cover to check if some parts needed to be replaced, as there had been some whining-noises while riding. There had also been a high-pitched noise while accelrating fast from a complete...

So I did a quick install on the Lexx slip on from 2011 KTM 350 sxf, I ended up not using the small 3" extension. Without it you can use to brackets to mount the can. I started the bike it does sound a little beefier, not idea power or anything, I put my stocker to ride. I don't know if I'll use...

hi just wondering are there problems with getting any old slip on can for my berg? I'm looking to make it race bike now, not road so dont care about db. should I just measure the mid pipe diameter and find a slip on that fits or is it more complicated than that. thanks

So I just scored a FMF ti powerbomb header and mid-pipe for my FE450 for a sweet price. Naturally the next step would be to look for one of those nice looking FMF factory 4.1 mufflers, but I'm kinda thinking that it's not really needed. My bike came with the muffler marked KTM Krizman on the...

I did a track day yesterday and noticed the clutch started to slip (slight) towards the end of the 2nd 15 minute session (only did 2) I have a slipper clutch (no pun haha) Would I be able to change the plates or springs from a regular clutch? I have no idea what brand clutch is in the bike...

I have a 2010 FX450 and am looking at purchasing an akro factory slip on like the one listen on the husaberg site as an upgraqde. Now, I've only had carburated bikes in the past and always had to re-jet the carb to ensure the bike would run at its best after a pipe change. Is this something that...

This has probably been covered here in the past and I did try searching for the answer to no avail, so I was hoping someone could give me the part number and a possible dealer in the USA where I can purchase an Akrapovic slip-on with carbon end cap for my 2010 FX 450. Thanks,

Is there any aftermarket slip ons available for my bike besides the acro

Hello Everyone, Has anyone installed or use these two components together on a 570 FE 2011? I am awaiting for my Vortex to arrive via UPS by this Saturday and off for installation. I've done lots of research and seem to come up with these two upgrades from stock. Any feed back would be...

Hello all, Can someone please confirm for me that 2011 FMF Slip-ons will fit the 2012 model? Second question will KTM Slip on's fit the 2012 FE390, as I'd really like the Anodised blue version of the 4.1? I read somewhere that the KTM Slip on had to be modified? Basically i really want the...

Hi There, im hoping somebody might be able to help me, i have a 2011 fx450 andam wanting to change the stock muffler for a slip on product with a removeable spark arrestor. I live in little ol NZ and getting such things locally is a nightmare (and expensive) im happy to buy something out of the...

hey i was wondering if there was a slip on exhaust by two brothers, or yoshi, or sumthin that i could fit on my 06 husaberg fe450 that is off a different bike the only one i can find is akropovic and its like 800 bucks my stock pipe is 21 inch long 3.5 inch wide and 4 inch high inlet is 2inch...

This is a very nice stainless can, it's not any louder than stock and it runs way better! It comes with a spark arrestor too if you need it. I haven't seen one here yet so I thought I would post mine. [attachment=0:3rekvz0c]SS Leo.jpg[/attachment:3rekvz0c]

What I got is: Leo Vince X3 ENDURO ALUMINUM Type: Slip-On Part#: 3823 Includes 98/94dB Inserts & S/A Wrong pipe for current bike (Husi 2004). Opened box and I cannot return. Never on bike and in mint condition. Works on 2009 and later Husaberg's and a number of KTM's. $250 shipped CONAS...

I have an Akro slip on I need to sell to make way for a full system. Not sure if this is against forum rules (sorry if it is) Aus sales only, has maybe 30hrs on it. comes with baffles x 2 (street and semi) no dents, minor skuff to logo I believe. $650 with box, RRP here is $995 PM me.

I have a like new Akrapovic Slip On muffler for sale. Fits 2008 and older Husabergs. Asking $400 plus shipping. Ryan