skid

Has anyone made or purchased a bash plate (or skid plate) for the 89-93 model Berg frame with the "Factory" bend on the middle bar under the engine? If so could you send some photos please. :spin:

HI, any one could help me to instal the alu factory skid plate on my 2010 390? I've find two little holes on the bottom frame, just on line with the 2 holes on the plate, but closed by a pair of plastic cover. Trying to mount the alu skid plate, after have been removed the original plastic...

This came of my 2011 Husaberg FE 570 but it will fit other models too. This has been used for less than 300 miles on the bike. I had a different fender on my bike that also had a took kit Anyways since I sold my bike I dont need this. I am asking 75$ + shipping ( via USPS).

Hello everyone, Just stumbled upon this picture: Does anyone know what skid plate is that and where can I get it (or anything similar, actually)? Thanks

So, first things first. As this is my first post I would just like to say hi to everyone here at Husaberg.org. I've been considering replacing the stock bash / skid plate on my 13' TE 300 with the Pure Tech aluminium one (80303991000). Does anyone have one of these on their bike and would be...

Ok, so I looked into this skid plate/tool box,and I decided to build it instead of buying it since the cost was prohibitive considering the current exchange rate. I don't feel like I'm stealing their design either, because I had already spotted something similar on another rider's bike and...

Hi guys! Has any one fitted a 650 with skid plate before? And if U did where have u got it from?

I've got an '08, and my first oil change, I didn't remove the skid plate because one of the bolts had become one with the nut, and I didn't have all night to deal with it. So, changing the oil without removing the skid plate made quite the mess. But, the location of the skid plate mounting bolts...

Does anybody have some sort of blueprint or inspiring pictures of home made skid plates? I am thinking 3 mm alu plate with riffles on at the moment.

Anyone have this for their Berg? My buddy has one for his KTM 350 and it really looks beefy. Only concern is that the Husaberg one, while offering plenty of protection, seems like it would reduce a lot of airflow. Does it matter? Would this affect cooling? Look at the right side picture. Left...

Does anyone offer a quick release skid plate. As the stock '11' is held on with one bolt and the rear hooks over the rear lower frame cross member I consider it to be quick release. I'd like one like this that has wider ears towards the front. Anyone make one???? Thanks !

Hey guys. No longer have my Berg and had this left over. It has about 40 total hours on it and works just as it should. It has a few dents and marks cause it did it's job!. $80 shipped. Pay Pal preferred. Thanks! Go here for a complete picture album: http://s78.photobucket.com/albums/j88/n...

All Brand New Take off's: skid plate $60 clutch cover $50 2010 OEM KTM/HUSABERG slip on USFS AND QUIET! $100 all prices plus shipping. Thanks Andy

I received lots of Berg goodies from my wife for Christmas. Hard parts radiator guards, washing cap set, filter cover for washing, P3 header guard, P3 skid plate, slave guard, etc. Here's some pictures. I laid the stock skid plate on top of the Pirie Performance one. You can see the...

Well anyways I took my aluminum skid plate off the bike last night and was not happy to see that it has nicely worn through the frame paint and thats after only 20 some hours. I can allready see some corrosion. Now am sanding and priming and painting the bottom of the frame and I certainly...

Hey guys I've been looking around for a skid plate. Could only find 2 options - the OEM one ($200) and the P3 skid http://www.pirieperfprod.com/p3skidplates.html which goes for $165 but looks less protective then the OEM. All the other skids I found were for older models and a lot...

Does anyone know where i can find BOSS rad guards, and I have heard that they have a skid plate available for the bike as the one I have bought from the Force Depot is garbage, pretty but not strong enough.

Hi, CODan here. I have a friend that is a Husaberg dealer. I make some pack and bag accessories for dirt bikes. Anyway, he told me that the only good skid plate you guys can get (with good waterpump protection) is from Italy and that it retails for about $160. Are there any others...

Check out this skid plate , attaches and fits great , I just ordered one for my other new 650E Has the best protection so far . hyderacing.com

I'm picking up a new '05 fe 650 tomorrow and will need a skid plate. Where does the plastic one come from that was on the Dirt Rider test bike?