sizes

Hi I bout a beaten up Fe 400 and it has a 19" rear wheel matches the front rim type and appears to be stock ...any ideas other than someone fitted a FC rear wheel to the bike - ps this bike is the roughest berg I own but starts one kick and runs like a little clock. :eek:

Anyone have experience with 08 camshaft and dellorto carb jet sizes? Please let me know! Thank you!

Hi, My 2007 FE550 currently has Metzeler MC5's on it It has an 80/100 on the front and a 110/100 on the back. I was wondering what tyre size came stock on the 07 as 110 on the back seems rather narrow, what is the widest I can run? And is wide better? I want to get it road registered in VIC...

I just bought a new counter shaft seal kit "to fix some leaking oil" and would like to swap out the front sprocket at the same time for the SM setup. Was wondering what gearing everyone was using when they covert the Fe's? Also, like I said I bought this Kit P#"00050000941" but it comes with...

What is the difference in size of the a b and c pistons. I need a new piston due to a worn wrist pin. Bore is clean, no damage, looks to have about .0005"/.012mm wear in the fwd to aft axis of the cylinder. Well within limits. I need a 92mm piston, however, not sure which one. What is the...

Hi Guys, I want to order set of japanese good quality sealed bearings for my 2011 FX450, ebay and shops are selling allballs **** and everyone knows how long they last, my rear bearings feel worn but no play there yet and I don't want to take them out and wait with stripped bike for the...

Hi I have a 1996 Fe 400 and i cant find front or rear wheel bearings or even the sizes! If you have any ideas let me kow. Tanks Taylor

I want a pair of crosser tyres for a friend for Xmas but don't know what size he needs. Can anyone help? I think they might be 130/80 18 rear and 90/90 21 front. Is that right? Any recommendations on pure off road tyres? Thankyou in advance :)

Hello:) My bike is a Husaberg FE 450 from 2004 My conrod was cracked and my engine is... a crap, looks like a cheese. But this is a different story:) I have to have new connection rod, but brand new costs 500$ or 402 Euros. I want to buy replacement conrod or maybe used, but i don't know...

I've just looked at the rear sprocket size on my fs 650 to fin it's a 44t hence the mad wheelies everywhere! With no top end. I believe 40 teeth is stand would you recommend putting it back to 40t or maybe a 42t compromise..? I use in on the road and live in the countryside so best of both...

Just thinking about going to a 120/70/17 series tyre rather than a 120/60/17 anyone using a 70? Whats everyone running? seen spec on 2005 model says 60 series yet 2008 model say 70 series. Any thoughts welcome.

Hey guys, Husaberg n00b here (not a bike n00b). I'm after a bit of info on FEs and the engines, hopefully you lot can help. I'm planning to put a rotax 654 engine (bored out to at least 720) into an FE frame. I know it would fit into an FE650 frame. They're fairly hard to find over here for...

Can anyone tell me why there is such a difference between Europe/Aussie and US tire sizes for my 2010 fe390?? On the rear 110/100 vs 140/80,what handling differences there is??

Hi, Would anyone know the length between centres and width of the big end itself ( not the rollers ) For 05 onwards 650s? Also can the crank pin 35mm be brought separately, part# ? Cheers spanner

Ok this should be an easy one for you Berg gurus, (although I have SEARCHED everywhere to find it). WHat does the stock 2008 tank hold? What does the aluminum race tank hold? I have both, bike used for GNCC racing. I only have an hour meter on it and want to get an idea how far I might get it I...

anybody know what size tyres i need? fron rim is 3" and rear 4.25" thanks.

i have a '00 head here and the valves are tiny compared to later. looks like 32/27. anyone know what the valve sizes were in the 501/600? trust it would fit? what do we know about the std systems? i trust the 501/600 had bigger headers but all shared the rear section? regards Taffy

well, I order a M-10 O'NEAL boot from ebay, size 8 which is european 42, but it does not fit me. I had try size 8 before I order and it was fine. I had try with Acerbis, Form, and some others. Now I need to know if the THOR Quadrant boot size 8 will fit me, or I have to order the 9. Does anybody...

Hi all Was thinking of getting a head with bigger valves in my current 06 SuMo race bike. The easiset way seems to get an older head but I'm not sure what years had what sizes.... The spare parts manual says that 04 and onwards has 35mm inlet and 30mm out. After searching this excellent...

on my 01 650e I'm currently running a Bridgestone 110/100 18 Rear tyre.......I think i need to replace it soon.......is this size tire the one to go for...or do i have choices!?