signals

Hello, I need info or a photo where to connect the turn signal cables, because I have a switch, but the previous owner took off the lamps. I have LED indicators and a flasher, but I don't know where to connect it. Husaberg fe450 2009 Thanks in advance and best regards friends :)

Hi everyone I have converted my 08 fe450 to a dual sport and bought the OEM harness along with street kit from Offroadboss. Everything went together nicely, but the signals flash double time. Is this normal ? The signals are not OEM and I've tried switching wires in case I got the ground...

Hi All. I have a Husaberg FE 390 model 2011 and I want to install the rear turn signals. I already have the signals from a Kit that I got from a KTM 350 Freeride and I have already installed the front ones I have not been able to install the rear ones, because the rear fender support...

I've been looking for flush mount replacement turn signals for my 2011 FE570S, and have found the Sicass Racing "Orange Lens LED Flat Mount-KTM" PN 22-100C. Here's a link: http://sicassracing.com/store/turn_sign ... _mount_ktm Has anybody tried these, and if so what do you think?

I have just finished "dual sporting" my 2011 390 FE. I used factory harnesses, switches and relay but installed LED turn signals and license plate light. Idling in the garage with the headlight on the turn signals barely work. If I rev the engine with the headlight off the turn signals are...

Hej! (That's hi on husa native language) Im trying to reinstall the "dual sport" bits on my newly purcased fe 570 -09 Does enyone know how the turn signal harnesses are supposed to be drawn? The guy I bought it from has unfortunately removed the wiring harnes and the relay as well as the turn...

This is happening to anyone else? Mud in the rear turn signals and tail light after a wet ride? This is from a ride yesterday with puddles and a few muddy spots. Didn't submerse the bike or anything like that. I never had a bike do this from just splashing down wet trails. Any suggestions on...

I have only had my bike for a couple days and I have not had the time to tear her apart to find the answer. Do the 2010 USA have the same main wiring harness as the EU bikes with factory turn signals?

Hi All I am new to the forum and awkwardly am going into a questions, or 2 at least. I have always wanted a Husaberg SM and have found one that looks good, the bike I am looking at is a Husaberg FC 501 SM 1998 It is set up for road use but has no speedo or turn signals. AAre these...

I purchased DRC MOTOLED 602 Signals. 12Volt with Orange Lends So I unplugged the current signals and plugged these ones in, from what I was told is that they would flash very fast. But these are doing nothing. Plug in the old ones they work fine, LEDs not working at all. The only signals...

Any recommendations for flush mount signals for my FE550e?? Also wondering if anyone has installed a twin projector beam type headlight / number plate?? Thanx.

I also replaced the tail w/1157 jam strait l.e.d. looks cool when illuminated also draws 1/10 th the power

check out the badass aluminium led turn signals I have been eying since I decided to get the berg

Should the turn signals and horn work when the engine is off? Everything plugged into the new euro harness.... just wondering Thanks Vern

As the title asks, does the 07 FS650/550 come from the factory with signals, brake lights etc... What about a key? I know it is not "street legal" but it would pass an inspection if it had these parts.