shim

Are there any quick wins with the stock valve? If Anyone can point me to a good shim thread for any bike with the WP 48mm OC forks I would appreciate it. Or, if there are any "standard" shim stacks to try, please let me know. I understand rider weight and such makes a difference - just...

I have been getting mixed information regarding the valve shims used on a 2014 fe 501 USA/Canada bike. can anyone confirm are the shims 8.90mm or 10.0 mm ? Thanks Greg

howdy ya'll, I recently purchased a real cheap old berg, entire top end was dickered, and have been steadily replacing and fixing the bike and engine. I ordered a new head from somewhere in Yankee land and when it arrived it only had three out of four valve shims. I've been looking...

Bought this bike very cheap (in Finland) 2200€ and it was used in enduro riding and so does it look, but its electric start doesnt work. The starter motor works and the battery is new, i think starter button is broken but not sure about the relay/solenoid. In the relay/solenoid there goes 3...

I opened the valve cover to check the clearance on my 2010 FE 450 (125 hours). I found too much play on the intake side, with one of the valve that had more than 0.2mm. I removed the rocker arm and realized it was damaged, the shim as well had some marks and the rocker arm axis. Nothing really...

Hello all, its been a while. Can anyone help me with the standard shim stack for a TE300 2012. I want to fiddle again. :roll:

I have got Race tech gold valves in my bike. this is the stack 2 x 24 x .15 1 x 24 x .1 1 x 12 x .1 1 x 24 x .15 1 x 21 x .11 1 x 19 x .11 1 x 17 x .1 1 x 14 x .1 1 x 13 x .1 1 x 11 x .1 1 x 12 x .11 1 x 18 x .26 I have removed one of the two 24 x.15 shim it seems to be better. so it looks...

Here are the stock SHOCK shim stacks for the 09-10 FX and FE's. The FX shock has some more differences than just the stacks. ENJOY! Stock FE 390, 450, 570 Piston 1 16mm ID Comp 20x0.30 26x0.25 28x0.25 30x0.20 32x0.20 34x0.20 36x0.20 38x0.20 40x0.20 42x0.20 44x0.20 34x0.10 44x0.20 x 5 Rebound...

Hey all, I am going to be servicing my shock on my 09 450. Do any of you have any shim stacks you would like to share that are good for a slow A rider running enduros? Or is stock not really worth changing? I gotta say, I don't really have many complaints, but it would be nice if I could improve...

I bought my bike used and someone re-valved the forks. I feel they are way too harsh for the type of riding I do and was wondering if someone could tell me what the stock stack looks like so I can start over. The bike is an 08 FE 450. If someone has a good stack for a rider that weighs 225#...

Hello, I decided to follow your advice and update my fork with a MV instead of the more check valve behaviour which exists in the -02 fork. Three weeks ago I ordered the parts and I am still waiting. I have some understanding that some parts could have some delivery time but I was surprised...

Apologies if the following has been posted somewhere before Thought it may be of use/ interest to someone. 2008 650FE Base valve 24x0.1 24x0.1 14x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 22x0.1 22x0.1 20x0.1 18x0.1 16x0.1 14x0.1 8.5x0.3 18x0.25...

Hi All, I have just finished converting my 04 FE550 to super motard, can anyone quote me a good shim stack set up for the front susspension. I know they run a different springs. Regards Sparks.

Here is info/chart on the 2005 FC550 stock WP Shim Stack for the Fork and Shock. I lost some clarity on conversion to .jpg