set

Full black plastic set for Husaberg 390/450/570 2009-2012. 300€ + shipping. BRAND NEW:cold:

New in original package. Looking for the best offer.

How to set idle timing for 06 fe550.

Does anyone know a company/friend who still have a set of black plastics for the 2010 tm 2012 husaberg 300 on stock and for sale? partnr 8120805400030 I have contacted cyclebuy and a lot of other webstores i found with google, but no luck. Anyone tips?

Has anyone got some base settings for an overbored FCR? Many thanks

I’m a few clicks away from adding a 2nd set of wheels (with cush drive rear) to my standard off-road knobby set. Having ridding the Berg on the streets and some highways lately while sorting out my stalling issues, I’ve discovered a fondness for cruising around the city on my 570. It is much...

Newbie question. Any recommendations for someone who,can fit an unrated spring to the rear of my 2011 390fe and is it worth updating the front springs at the same time? I've noticed the seals need replacing so they have to come apart anyway. I am 6ft 3 and with kit on will hit 110kg...

I have a take off wheel set for 1998 Husaberg FE for sale. Wheels were taken off when new to put on supermoto wheels. The set includes original tires and tubes, front wheel has bearings, rear does not. No discs or sprocket. Make offer. Trades possible, let me know what you got, I still have 4...

Hello all , I'm planning to cross the Simpson next year and at the moment ride 06 Fe450 . Can anyone offer advice on set up . I'd love to use this bike but there doesn't seem to be options for larger fuel tanks. Any help will be greatly appreciated.

I know that you can change the close ratio gear set out of the FX450 and swap in a set from the FE570 but is it possible to just put in the wide ratio 5th and 6th Gears into a FX450 and leave the 1st 2nd 3rd and 4th close ratio gears in

Hello guys, so we're thinking of running a 5 day part of either the NMBDR or the AZBDR. to those unfamiliar with this names they are the New Mexico and Arizona Backcountry Discovery Routes (Backcountry Discovery Routes) This trips are 20% paved roads and the rest are graval and wide dirt...

Hello guys, I broke my number plate mount so i am looking for short version. 2005 parts catalogue does not include it but you can see it at other years. Is there set or i need buying them part by part? And what is the part numbers for lens, holder etc? Thanks.

Hi all had the berg out tonight for blast runs very well but small tick of tappets so Gina check them any one know were I can get the settings thanks

Hi all new on here just got my first Husaberg and it's a hoot only thing I wanted to do was set the Carb up what is the standard start setting on the air mixture screw On the carb and I can work from there :)it's 1993 model

Hello Guys once again I have to ask you for help and advice regarding my Husaberg 501 '97. Engine is now after a nearly coplete rebuilt but it did not start at all. Seems to be an issue either with parts or set up. It kicks back while using kickstarter and does not start. The obvious...

Now that i have 2 off road only bergs the 390 and TE250 ,i want to retire the street legal FE 550 to mostly street use put some less aggressive tire set and gear it more for hiway speeds whats everyone using? right now i have Goldentire enduro tires front and rear and 13 -52 for gearing...

Keihin 41mm FCR Pilot 45 Starter 85 Air screw 1.5 turns out Good starting point? These 3 air screws were in box of carb spares, which one should I use? Where in the UK can I get parts for this carb? Many thanks

with the 1996-2000 bikes unable to get a lower cam chain sprocket I'm just checking but I'm sure that the Husky lower one from prior to 1996 will fit? later than this they went to the 219 chain the same as I use in my race cam chain and sprocket set-up. 15/30 then becomes 17/34 or 18/36 but...

Hi all, just dropped the bike off at kais suspension specialist in Atherton. Lowing the bike 50mm and making some alterations to jets, oil, springs, etc Will report back full details and conclusion when i get it back and ride it. Cheers Brian

I have a 15 in the front and a 41 in the back. Iv somewhat topped out at about 85mph but I didn't like how high the rpms were. What is a good set for a higher top speed, what would happen to my low end speed, and what is the redline rpm on this bike?