2010 FE450. Got teh bike with 18h on it. No idea on hours now, but it's approaching 10,000km and I figure I should probably do some service.
Nothing wrong. No indication or hint of anything out of spec. I'm sure the valves have gotta be at least a little tight by now, so I was going to tear it...
Anyone got a PDF - or did I maybe miss a post somewhere?
Need to do some work including replacing the cam and adding some of Taffy's tune up kits. I have the Parts and Owners manuals - but the service manual would help me out...
Hi guys I’m in Australia and I’m really struggling to get my hands
On a repair service manual for my fe 390 2012.
I’ve tried many places with zero result.
Can anyone please help out a fellow Husaberg owner.
Thanks guys
I recently picked up a neglected 2000 600 FE that of course needs engine work. A fellow had it listed on here back around spring/summertime of this year.
I am in the process of disassembling the engine, and so far, things look promising. Crank rolls smoothly, and no play in con rod big...
Good Afternoon,
I am new to the forum and just thought I would seek some advice off you seasoned pro's!
I have recently purchased a 2004 Husaberg FE450 800 miles from new/30 hours. I have cleaned the bike up and put fresh oil in/cleaned the air filter etc. The bike goes like a dream and I...
Hello everyone.
I am doing the fork service on my 2010 FE450. I cannot find my service manual. Can someone tell me what kind of oil I need to put in them? Brand, Weight, etc.
Thank you
With no history on the bike except that it's a bit hard to start and with an upcoming tear down/status check I have the following questions:
1. I have read here that the cam follower bearings often go bad and should be replaced periodically. Is it enough to inspect them or should they be...
Hey guys,
I'm from Melbourne, Australia and just converted to Husaberg. I'm picking up a 2010 Husaberg FE 450 on the weekend.
I have found the owner's manual on here but can't find a repair/service manual. I did find the 2009 one though. Is there many/any differences between 2009 and...
I brought my berg in to get the valves check and test the timing chain tensioners. "I was hearing some noise coming from the engine, thought the tensioner was bad". I brought it in Monday. I didn't get the bike back until Tuesday the following week.
Turns out the noise was the decompression...
:o
Last year I purchased SRT rad guards. These seem to some of the better designs I have used with full protection from rocks, mud as well crash protection.
So:
Last week I noticed the blue anodizing was bleaching and was kind concerned as I did spend a good dollar on these and wouldn't...