selection

So obviously the 2 are related,is there any adjustments I can make at the basket to solve this? There is a brand new slave cylinder,master cylinder operates as it should,no air in the system.....it’s as if the throw on the pushrod is just coming up short. Adjusting lever span makes no difference.

Hi all, I am new to the forum and officially 7 months into owning my first non-Jap bike. Anyway, I have a '14 300 and I am at 158 operating hours and starting to lose compression (down to 120) after a long ride yesterday. I am looking for advice on piston selection for this bike. I have...

I should probably be beaten with a stick to admit that I bought this bike 5 years ago and haven't decided to fix it till now. When I got it, it had a really bad clacking going on in the head, the owner was well aware of the possible "grenade" he had. To my advantage I got it for an absolute...

I know these are sprung light from the factory. i read somewhere that they are even sprung lighter than the xc's and xc-w's. i went on to read that they are the same setup as the 2014 six days edition. either way- im 205 with NO gear on and the race tech spring calculator is suggesting .5 fork...

Hello. I'm about to get a new Husaberg but I really don't know which one to choose: TE250 or TE300? They are so similar. It's not for competition but strong enduro so the category is not changinfg anything. Any advise?

Hi Guys, Had my bike for a while now and figure it's time to spend some dollars on some correctly sorted suspension. On a good day I might make the grade as an 'average Joe' but I certainly ain't no pro. I'm 6'4" and probably 115-120kg fully loaded and ride all sorts of conditions. I've done as...

Hey there guys, just putting together my 04 550 engine and am finding netural between 3 and 4 gear. Cant understand or find out in the workshop manual which way the shift drum should sit or which way the positioning star should sit on the shift drum...

Hey Guy's, my 08 FE450 now has 9.9 hrs on it. I was out on Sunday for a trail ride, after the first woods section we came out to a fast road section...got on the gas hard and once in 3rd the bike would not upshift into 4th, no clutch/or clutched it did not matter...had to jam the shifter back...

Hello, everyone. I'm having problems with blocks ripping off my back tyre (Pirelli MT32 110/90/10). Some side knobs have also come off the front tyre too (Michelin S12 190/90/21). My local MX tracks are fairly soft & sandy, but also very stoney (some large stones). I've only recently got...

Pirellis and Dunlops so far, not sure about others... To be honest I haven't been too concerned about others as I'm a pirelli or dunlop guy....I've been on other brands and have liked them as well....