sealing

What are people using as the "copper paste" that the Husaberg service manual mentions when installing the exhaust headers? I'm used to jap bikes with copper gaskets and bolted collars to seal up the headers. How careful do I need to be in sealing the headers up? I've got one header with a...

Just thought I'd drop a line to tell you about the valve sealing troubles I seem to be getting when rebuilding engines. I often didn't used to have to worry about valves sealing on the exhaust side but in recent engines it has been virtually every single one! lapping the valves in, I find...

New Husaberg owner here from Phoenix Az. Just bought a very nice 2002 FS650. Im looking to seal up the rims to run tubeless tires. Any good recomendations to seal the spokes.

Installed my big tank from BOSS today on the 2005 450. The only issue I am having is sealing the petcock to the tank. On the left side I used a Husky petcock like this: (borrowed from BERGORACERS gallery) To get the Husky tap to seal I used hex screws instead of the supplied philips...

What sort of sealant is used on the exaust system to seal from air leaks. Ive been told normal silicone will do, will this work I would of thought the heat would be to high for a silicone sealant. Sparks.

Okay I have looked but can't find the thread that was being discussed recently about the best sealant for the rocker cover can anyone point me there? also, does anyone know if there is a "rebuild" kit for the dellorto seals and gaskets and such.