screws

Hey guys, I recently bought a fe390 and I am loving it, coming from a cr250. So nice to ride. I'm trying to tidy up bits and bobs that the previous owner was a bit heavy handed with. One thing that I'm trying to not only figure out how they did it, but how to get them out. 2...

about husaberg fe 390 . For an oil change have to open the two screws? Are the two screws underneath to prevent oil are separate or that the oil tank? thank you ;)

Adler slipper clutch locking screws lenght and manual Does anyone know how long should they be? Part number is 59032007100 edit: m4x35mm

Can anyone give me value for bottom screw? Top one is 10nm? Are there any difference beetween them - in part catalogue they have got same size but one is marked "SL" and they have got different part numbers.

] Current temp outside at 0947hr is -12c (10f) yes other places get colder but this is the UK in November. I suspect we've been softened up a bit after about 20 yrs of mild winters. Off to stick screws in my tyres now after the success of last year, though i've learnt not to bother with...

A simple question - I hope. What have people done when, after repeated removal, the agressive 6m screws that hold the top of the side covers to the fuel tank start to chew out the plastic. Is the answer to turn to Tarzan Grip or is there maybe something more sophisticated like a thread insert...

on the 2008 model mine are M5, but the manual says they are M6. Is the manual wrong or are some 2008 m6 screws that hold the chain rubbing guard? Anyone worked out how not to have the lower screw cap destoyed or does it depend on the spocket used?

I was checking the torque on the bolts today and found out one (out of 4) of the front wheel clamping screws threads was completely worn out. I took out the bolt and found this: I still have some days on my warranty - do you think the dealer will take care of it ? if not how can I...

I found oil leaking from my flywheel cover. Removed cover, pulled flywheel, found oil leaking from stator mounting screws. This is a 1998 FE600E. Should these screw holes go all the way through? If so, what do you use to keep oil from leaking through threads? Also found stator body cracked...

If purchasing a set of Acerbis rally pros, open the package at the store and check the screws that hold the secondary clamps to the inside of the bars (4 of them) I didn't, and will now have to drive back an hour for the correct ones since mine were packaged wrong. (one size too small) Might...

has anyone any idea why my 95 fe 600 ignition stator screws keeps on loosening?? it happened twice before even though i use loctite 255, i have been lucky so far and did not have to buy a new stator.