scotts

Currently on my 09 FE570. Works great with no problems. $300

Hi all! It's been a while since I've asked a question on my 2010 FE450 but here's the story... I rode a 550 mile dual sport through SD last week and all through it I could hardly turn the bike, it wanted to go straight and gave me a very unplanted loose feel when turning. So after looking at...

I have a nearly new Scotts Bolt On Damper that came off my 08 FE550. It is the traditional mount - NOT SUB MOUNT. Like new condition. $275 US srocher at Stratfordhomes dot ca

Hi Im just trying to fit my underbar scotts damper to my billet triple clamps and i cant get it to fit. Just wondering if their are any adapters or and idea on what i am doing wrong so i can get it to fit. Cheers Conrad

Hello Guy's, Which steering stablizer would you all reccommend, the Scotts or a GPR? Thanks in advance for any help. Be Blessed Brothers, Eric.

I just installed a Scotts damper on my 07 fe450, and was wondering what settings you folks use for tight woods, wide open and everything between. Right now it have it set at 6 clicks from full hard (3/4 of a rotation), is that a good place to start for woods use? Thanks, Dan

I'll be transferring my Scotts steering damper from my WR to the '10 FE450 (undermount) and I guess I need a whole mounting kit (frame bracket, pin and bar clamp) and was wondering where would be a good place to get that? I talked to Scotts and from them its ~$180 but just seeing if there is...

Selling a brand new Scotts Steering damper. $300 shipped in the continental US. I can also supply a submount frame bracket and a submount to fit the 2009-2011 models for an additional $100. Email me at [email protected] with any questions. Ryan

I'm selling a Scott's stainless oil filter that came with my bike. Fits all F models 00 to 08. It has less than 50 hour street riding and looks perfect. I think it probably is better than paper filters, but I don't want to clean it every time. Will sell for $35 shipped to US address. Here's a...

[attachment=2:325isu05]CIMG3040c.JPG[/attachment:325isu05][attachment=1:325isu05]CIMG3038c.JPG[/attachment:325isu05][attachment=0:325isu05]CIMG3033c.JPG[/attachment:325isu05] $4,500 obo

I got my 09 berg early last year, and bought a scotts damper mount kit, and fitted it as per the instructions. Later I removed the headlight assembly and replaced with just a plain front number plate, but left the majority of the wiring that was attached to the connector bracket mounted on the...

Hi All, Long time lurker, first time poster and yep, I just got myself a Husaberg after riding Orange for many years. So there I am perusing the threads regarding fuel tanks and I see this nice looking sub mount for the Scotts damper. I have looked around and pm'ed the poster but no luck yet...

will a 2005 ktm 525 scotts steering damper mount fit a 2008 fe650 ???

Ok so I am in line for a new 2010 berg I have a scotts steering damper of my old ktm 525 exc 06 model. Does anyone know if the submount kit from the damper will fit the 2010 berg. If not, do you guys know if I order the 2009 submount kit from scotts, will it fit the 2010 berg.( will the...

I just got a Scotts damper for my 03 fe400 and am having trouble. I wonder if anyone has encountered this problem and can offer advice. Check the picture to see what I mean. The link arm on the underside of the damper is hitting the steering stem nut before the damper sits low enough to bolt...

Gday All, I've been considering the Ohlins 2.0, but I have also been looking the features of the equivalent in the Scotts. With the Scott, In addition to the Damping Level Adjuster Dial, and Return to Center Adjuster Dial, it has a screw that adjusts the angle the damping effect stops on...

I have a scotts damper and would like to mount it to my 09 husa when i get it. Dont want to raise my bars anymore than 20mm so guessing that an underbar option is out of the question? Anyone know what post and bar clamp i can use to mount my scotts damper, with my bars in the #3 position...

I want to buy a complete Scotts stabalizer kit for Husaberg. I know I can order one directly from Scotts. Does anybody know another source?

I have been using a Scotts stainless oil filter on my track bike for the last year and have been very pleased with it's performance, has anybody used one on their berg? I see they list one on their site. www.scottsperformance.com/products.php? ... c251eb1d02

I am toying with the idea of the GPR V2.0 or the Scotts sub mount stabilizer. The main problem I have with GPR is the damping away from and back to center. The free damping back to center makes more sense to me. The main problem I have with Scotts is the price! Who runs which and what do you...