rubber

Hi, I just bought a 2011 FE570 and while doing an oil change I pulled some rubber debris from the oil screen. The only thing I see in the parts diagram that might match the shape is the valve cover gasket. Any thoughts on what this could be from?

I just finished with the installation of the footrest rubbers on my Husaberg FS650E 2006. They are factory KTM parts,you have only to fasten them using a small plate secured by a nut under the footrest. They help alot with vibrations on the road,i think about 30%! Ktm part numbers...

just thought I'd let you klnow that I am having the swing arm polyurethyne protector around the front produced for both the very old and just the old Husabergs! 12005201 which was available from 1989-2000 (all models) 12005203 which has just gone out of production was 2001-2003 (all...

I have a '06 FS650, and on the last oilchange there was alot of soft rubber particles in the oil. The particles are black and the biggest 2x3 millimeters and aprox 1 mm thick. My first taught was that it was from the seal on a bearing..but there is not any sealed bearing as far as I can see...

I Installed a Keihin 41 mm on my 97 FE 600. This Carb made me really happy, one kick and it starts hot and cold. But i have one problem, I can not get it to fit air tight because i have a alu holder on the intake with a rubber boot around it which keeps getting loose. Now i am looking for a...

hello ! on my 650 2002 the rubber has worn out , but my OEM husaberg supplier cant get me a new one because they are discontined ? what to do ? regards daniel

the Husaberg site is saying that the inlet rubbers up to 2004 have all been stopped. so we need to find another rubber between us that fits. I'm assured that someone had the perfect match out there a few years back when he went to a breakers and found one. alas he forgot to find out what...

When I installed my fan kit, the directions showed a rubber boot that covers the wire connectors on the thermo switch. My kit didn’t contain a rubber boot. I just have individual insulators on the spade clips and unprotected lead wires. Did anyone else get a kit without the rubber boot? Thanks.

Hi all, 2008 450 carbi intake boots keep spitting under the hose clamp on the motor side. Before KTM took over these boots had metal inside the rubber, but no longer. Anyone found a cure for this. I note the 550 and 650 boots are different for the bigger carbi and angle required.

I own a 2001 FE650. The other day I was changing the oil and found quite a bit of shredded rubber on my pickup screen. I have checked the external seals and found no leaks. I replaced the lines to my remote filter and cooler and cut open the old ones. No deterioration there either. There is...

Dellorto gurus ! When trying to set my mixture and idle screws, the smoothest running is with the mixture screw all the way in. I notice the little washer and rubber is missing and wondered if that could be the reason. Please advise Regards Ady

all, I am looking for a good vibration dampning rubber mount triple clamps for my berg. I was thinking about the protaper rubber mount system with a new protaper bar but i dont know which one will fit- anyone have suggestions? the reason why i ask is i think i am suffering from a bit of carpel...