rpm

what the engine d rotation to fine tune the ignition point rotations with the bike in slow someone knows

Believe it or not.

Hello Im searching at how many rpm you get the max power in a husaberg FE 501 from 2000 i guess that would be between 7000 rpm and 8000 rpm but dont know exactly. Someone has a dyno diagram of this model ?

Hi all, I'm totally new to 4T engines, and recently acquired a 2009 FE 450. It had that knocking sound at low rpm, and after a bit of research it all pointed to a faulty cam chain tensioner. I replaced the cam chain tensioner with a new OEM one, and I did the trick of compressing it with two...

Hey, does anybody know out there what the rpm redline for a 2011 FS 570, because I find the 6th gear to be to tall on my bike and there is neat way to figure out on this website Gearing Commander: Motorcycle Speed, RPM, Chain & Sprockets Calculator to change the top speed on it, so I can make...

Hi all So this is my first thread on the site (so plz be nice) I have spent the last 2.5hrs looking for this answer and i just cant find it, on here or in the manual or even with a search engine. Can anyone tell me what the redline RPM is on the FE 650e 2004? I have just finished the 3...

Hi All, After getting spark on this bike it started and idles well. It now has another issue. It wont rev up and stumbles and backfires at mid to high rpm. When this happens it smokes out of the carb and stalls. Included is a video of the bike doing this. The carb has been gone through and is...

Hi! anyone knows how to lower husaberg FX450 rev limiter? Target rpm would be somewhere around 4000rpm. http://www.magnumtuning.com/en/detail/r ... er-cdi-box Something like that but I dont think that -20% is enough. If somebody has done some sort of DIY part I would be very intressed of how...

2011 fe 390 with just over 3 hrs of life. I get a backfire at low rpm and applying the throttle. it has happened 5 or 6 times. Any ideas?

This is a "new to me bike", and I'm loving it already. Went out with her today to continue me education. Rode about 40 miles feeling her out. Found the rev limiter, at first, and that was fine, it taught me when she wants to shift. Then late in the ride found her to never get there...

Hello Dear, This is my first Husa and I don't have some experience. I own FE501 2003 with Dellorto PHM40, the problem is that on small rpm if I open the throttle little bit faster the engine shuts down. How can I fix this? Is it possible to adjust the with the mixture and idling screw or it's...

Hey guys wondering if someone knows from working on a dyno or with a scan tool what is the max RPM on the FE 570 before the computer interrupts the ignition. I've hit the ignition limit in lower gears but not in sixth gear with 14/50 gearing

Hello fellow Berg-lers. I'm hoping one of the Berg Gurus here can help me, I've searched using every term I can think of with no luck. I have just fitted a Vapor to my 08 FS650 and I'm seeing a peak RPM figure (using the Max Recall screen) of over 15,000rpm with normal aggressive riding but...

how many rpm do you think a roller on the cam see's when the berg engine is flat out, 30,000 rpm?

Hey.. Have a question if anyone could answer it... we have made a 44mm carb out of a 41mm keihin carb with no tps on. But i have trouble to get it to run properly on low rpms. The big problem is that when i have put in the proper slow jet and turned in the fuel screw properly it idels great...

To any member, How can I measure my engines RPM? Is there a multi meter or small hand held device I can use. Would like to be more exact when tuning. Appreciate any help. Thanks, Mackberg :wink:

I very happy for my FEE400 98, i followed the hard to start manuel, and it now start at the button. On small traks its perfect, but when i run at large field i feell it stops rewing to early. I run standard all the way, and have tried with more timing advancing without any change. I know its...

Hello, my berg 501-97 has started to run very badly on hig rpm´s. On low rpm´s it´s runs great. I just can´t figure out what´s the problem is. The bike has run great, but suddenly it started to run bad. Valvet clearens-ok new stator cleaned the carb fresh air filters new...

Me and Mr 3Nanner are doing some noise testing on our 470 and 650 motards tomorrow. We have a very accurate noise meter and also a clip on tacho so we can acurately make the engine rev to a certain RPM. For UK static noise test we have to hold the engine at 50% of max RPM. I'm guessing...