routing

I’ve got a question for those fellow Berg owners of this period who are have the underseat aux fuel tank, as I have on my 2008 FE550. While I am glad to have the almost 3L of extra fuel. The problem I’m facing is hose layout. I find the route from the tap to how I’ve plumbed into the fuel...

I'm an idiot. Now that it's out of the way... I ripped apart the wiring harness on my 2010 FE390 and I can't remember exactly how it routed into the battery/rear sub frame area. Any chance someone has a pic ? The main problem is that I can't mount the tank cuz the main wire is in the way...

Can anybody make a picture of their vent tube routing. My problem is that is if the vent tube is going all the way to the front tank vent, you will end up with fuel in the vent tube which blocks air when refueling (so fill goes even slower). Now i have a small tube as vent which I block off...

I am installing head and tail lights on a 09 450 that didn't come with them. Do I drill a hole through the subframe for the wires, and on which side, or do the wires go through that black plug in the center of the subframe. Mine does not have any holes in it but I do see 2 rectangular spots in...

Hej! (That's hi on husa native language) Im trying to reinstall the "dual sport" bits on my newly purcased fe 570 -09 Does enyone know how the turn signal harnesses are supposed to be drawn? The guy I bought it from has unfortunately removed the wiring harnes and the relay as well as the turn...

Took the subframe off to straighten it up which worked to my surprise! now i can't figure out the routing of the main harness back onto the subframe to get it to fit nice. can someone stick up a pic of it coming round the shock and how it runs, my tank now gets wedged on it! cheers

Quick question for you guys. What is the crankcase hose routing on the new Bergs? I went for a ride last night and on a snotty hillclimb I got bucked on a root and did a standing vertical pirouet 180 landing facing downhill. Upon restart, my buddy told me that I smoked out the exhaust like I...

Hey all I'm fitting a thumb brake to my berg, but a but unsure about the routing of the hose! I was just gonna go straight down the frame on the left of the bike? But wondering if the heat from the engine will affect braking etc?

I'm in the process of installing tail and turn signals ,I can see the channels in sub-fender but where do the wires go from there?

I have an '05 FE650e and noticed in my manual that the clutch line and decompression cable were run behind the triple clamps on the bike in the photos. My bike came with them in front and they seem to bind slightly with the wiring harness. Which way is correct, my Yamahas seem to have them in...