rotor

Looking at getting my -02 FE650 registered after finally getting everything (almost everything) running. I’ve been looking for the specifications for the brake rotors for my bike, and it’s hard to find! My rotors are 4mm thick where there is no wear (so 4mm brand new?), and 3.3mm thick where the...

Can anyone help me find a front disc for my 97 fe501?

Up for sale is a BRAND NEW NEVER INSTALLED 300mm floating rotor for Husaberg or KTM front wheel. 130 euro postage included to world wide under tracking No.

Hi Guys, I've been looking for this for about a week. Even my local dealer had problems finding the adpter for the stock caliper. If I am not wrong, most KTM rotor will fit fine but the adapter is a pain in the A so far :( Look at it, something is missing poor thing :giggle:

Hi all, purchased a support from motostrano for my 2011 FE570 so i can run a 320 rotor up front for street got the new support mounted all up with the brembo caliper. i tried swapping out the oem guide plate (second shot) to the new support and it seems to push the pads too far down to get...

need new or good water pump rotor-discontinued item mine's all chewed up from PO using too much silicone sealer in that area, thanks again guys

Im looking for a flywheel for my 550 2002. Anybody that can help me? Shipping to the netherlands.

Hi all, proud new owner of a FE 570. been looking around and seeing all sorts of different info. can any one point me in the direction of a good rotor + bracket combination for my front 17" when i have streets on staying with stock caliper? 310 or 320, ideally don't want to break the...

Guys, i cant seem to see this listed on the parts fiche? are they still available? i had a small crash a few days ago and my front disc was damaged..the axle sliders saved the fork legs but not the disc sadly..:(

I've been able to match the front rotor with ktm parts, but the rear I cannot find a match. I'm hoping to find a good non-oem alternative (such as Tusk or braking) but can't seem to match it up. Anyone know if there is a KTM equivalent? I realize the rotor is on the opposite side, is there a...

So I'm fitting 17s to the berg that came with a 320mm rotor. I'm looking for a 310mm rotor to match the Beringer caliper that mounts direct to the forks. The wheels are from a aprilla pegaso I think and I can't find a 310mm rotor that will match the wheels. The measurements I need are...

hi all my rear brake rotor guard got bent and the clearance from the rotor is 1cm now. Anyone tried to repair the guard. Should i get it out and try to get it in its initial flat form? I am worried about its strength limit. Thanks

So I was having a charging issue 12.1 to 12.4 volts with the headlamp off. Trouble shooting the usual suspects with my mechanic: 1. Quick wire inspection - Reg/Rec replacement - no change 2. More thorough wire inspection. Connectivity tests and grounds check - a bit of a fiasco since the...

Hi everyone. Berg Fs650c '02. Have someone any ideas where to get these wave spring washers for not stupid price? http://www.sdp-si.com/estore/CoverPg/Ha ... ashers.jpg http://www.hkmetalcraft.com/Images/Prod ... ashers.gif ID=14mm, oD aprox 20mm. Who have bergs with beringer rotor knows where...

I have purchased a 03 FS Husaberg and recently found a set of cush drive wheels off another FS from the 06 model year. They however did not come with brake rotors and I found a great deal on a rear Husaberg rotor off new FS570 bike, the bolt holes do not line up.....did they make a wheel brand...

Has anyone used any of these brackets to use a 4 pot caliper with a 320mm disc? http://www.yoyodyneti.com/ProductInfo.a ... id=70.2011 (016 and 017 are for KTM) http://www.ktmax.de/indexa.htm (select brake systems from catagory, then select caliper adaptor) I am asking specifically to...

Hey guys I searched the site first and checked the the repair/mantainence docs and haven't been able to find how many foot lbs/ newton meters you are supposed to torque your rotors to or your sprockets, also the brake master cylinder for my repositioning bracket. Does anyone know these #'s off...

i'm after more power from my front brake (02 FX470).... one finger power. anyone figure out the best rotor pad combination?

Guys, :( :( I need urgently an ignition rotor for my 2001 Berg. I've made the nonsense to try to take it of with a 3 leg puller and the result was 2 pieces. One still attached to the engine, and the other (just a ring) off with the puller. As the original part is sell only in kit with...

there is currently a after market front brake rotor for sale on ebay it is stated as for a 00 fitment will this fit my 99 FE600... thanks guys cheers doug (PS) how much is a brand new 2L husaberg camelback worth just got one for 51 dollars :D thats good yeah.....? aus dollar