rockers

Having learned of the shortfalls for the 01 550 top end I started with the roller rockers. There seems to be two types installed. Don't know which of two prior owners may have upgraded or replaced when failed the roller bearings. Please chime in and share what you identify. The issue being...

Serviced my 570 a couple of months ago. New counter shaft, piston, timing chain bla bla bla. Got it running very well next minute it stopped only about 100 kms. Pulled it down seized rockers, piston quite worn. (Lucky no bugged barell) the oil strainer blocked. Thought I left something in there...

Hello dear, I measure axial play of rockers on my FE501 2003, and it's way out specified in workshop manual. Manual says 0,1-0,15, while mine have exhaust 0,25 and inlet 0,4. I contact Husaberg dealer who said that this is normal and that he newer change any bushings. Also there is a small play...

Gents, I've got a 98 FE501. One of the rollers on the aft rocker let go and blasted through the top of the rocker cover. I just missed a replacement off ebay last week for 14.99!! Any chance one of you are parting out and need to let go of this part? Thanks in advance EDIT: Adding...

Just curious as to whether this info under common faults in the doc is correct. My inlet roller is on the way out and this looks like a cheap fix but is a ball bearing sufficient as a roller on the end of the rocker ? Cam follower bearings pre '03: They all go eventually. They break up and...

How do they perform, how much did they cost, and would you make the previous (longer) intake rockers as well?

I am about to install the brandest, newest rockers available on my Berg, which should definitely be a plus and will allow me to ride with a certain amount of confidence that I will not explode yet another rocker. I found that the intake rocker P/N 59036060144 is really smaller than the...

Could someone tell me what the deal is with the 01-02 rockers and their upgrade? The ones I have installed have a pin inside the dowel, as Taffy puts it in the doc (http://www.husaberg.org/wiki/index.php/Engine_upgrade, scroll down to "Rocker-arm roller bearings and pins" part. I have a...

the rockers on mine have side play of about .75mm and 1mm respectively and can rub. is this a big deal? what things do we do to get the end float sorted? regards taffy

be careful if like me you get another rocker cover and someone throws in the rockers and stuff for free. there is a difference between the exhaust rockers on the BV motors and the SV motors. upon checking today the tappets have been right on the edge of the valves. i would imagine that in...

. Hi, this is my first post on UHES and was hoping you guys could help. In 02 I replaced the cases crank cyliner, head piston ect. The rockers appeared to be in good shape...

i have an 02 470 and i have some "updated" rockers that i bought as preventitive maintaince. as i have not compared them side by side to the updated ones...what is different between them? also what actually fails regarding the rockers...the roller? if the rollers are prone to fail.....it...