ring

I finally got all my parts back from various places for my 2000 FC 501. I don't have a piston ring install tool. So I tried the following being very careful, but gave up right away before I had done any damage. Maybe I could have done it the opposite way, but that's not what I did. So I...

Hi, I’m interested in checking the condition of my piston / rings. Will the top end come off the cylinder with the engine in situ or do I have to plan on removing the engine? The space looks pretty cramped, but maybe removing the rad frees up enough room? Thanks. C

Has anyone had a problem w the oil f housing o ring that comes w a new filter being larger than the one that came w the bike ? 2010 fe 570 Thanks

Hi All, Can anyone supply accurate dimensions of the clutch retaining ring, that lock in the half washers on an 03 Fe 501? While doing some clutch work we have lost the original so may make one? Any available out there hopefully in NZ would be even better (part # 23016401) Thanks

Should the ring be with the chamfered side up or down? 650 02 model :) Got confused when my old piston had it pointing down, and my new(used) have that side up... Andreas

Hi all! I am looking for the dimension of these OEM FE570 parts: Piston: -diameter -height Piston rings: -diameters Conrod: -length (from small end centre to big end centre) -small end diameter -big end diameter -thickness at small end -thickness at big end I can use any...

Hej guys, What side does the shaft seal of the crankshaft have to face? The spring facing the inside (crankshaft) or the outside? husaberg fs 570 2010 Much appreciated!! Yovan

I have a revloc dyna ring used 4 times Fits 390 / 450 / 570 fe ,fx 2009-2011 £180 + delivery Tried it and decided i wanted left hand rear brake over auto clutch so got a rekluse pro and brake set up . Shame really but you have to keep the clutch m/c . I'm uk england but will post anywhere...

For sale is a revloc dynaring for 09 and up fe 390 450 and 570. Includes dynaring, master cylinder cap and adjuster and also the kit to install with out converting the master cylinder. It has less than 5 hrs of use and looks and works perfect. The only reason i am selling is dynaring is not...

Hi has anybody tried one of these or know anyone who has,or any thoughts on whether it works looks interesting though......colin : http://www.factoryconnection.com/Mercha ... ode=FCSHKP

Put a long hard trail ride on a 570 with the new Revloc Dyna Ring today and it was flawless. Everything as promised. I never thought I would like an auto clutch but I will never go back to stock. This clutch makes tough trails way easier. If ridden right I can see a distinct advantage for...

Hey guys, I finally got around to installing the Dyna Ring in my 2010 FE390 and testing it at our secret (ok not so secret) test track. The Cliffs Notes version is installation was a BREEZE. Anyone can do it and it takes all of 15 minutes...start to finish....seriously. I tested a bunch of...

Hi, has any one seen/used one of these before; http://www.revloc.com/dirt/dyna-ring.html i was just wondering what the differences between this, and one of their autoclutches was? as it seems to do the same thing only cheaper! cheers, Jock.

Hi, Am I able to change the seal ring on the secondary shaft(behind the front sprocket) from outside,I mean without splitting the case?

Greetings all, Just wanted to give a heads up to all the berg owners with FCR carbs. There is an O ring on the vacuum release plate on the slide. This is something you may want to look at replacing every so often as a matter of maintenance. I just replaced mine and when I started the...

I'm trying to replace the O ring on my 01, 470. I was wondering if anyone could help me with ideas on how to remove the old one as well as fitting the new one. I havn't had any success for the last few days.

Hi all! The one on the left side of the crankshaft seal ring I saw that there are a little bores. (this is pierced industrial) Is this made in this manner at everybody? Why is this solved in this manner? :dontknow:

Recently had a discussion about the advantage of Ring-chains versus No-Ring chains on offroad-bikes. I say, that non-ring is better, why: I do prefer simply solutions Way cheaper (wear is bigger, but even in comparison: cheaper :wink: ) way less internal friction (why spending hundreds of...

can someone find the width/dimensions of the spacer would be if the counter balancer c/w bearing are removed? had a good look but couldn't find it. it's out there somewhere! regards Taffy

So, we headed to Finland for the race 3 and 4 in the cup. Botnia Ring is located some 60km from Vaasa. It was the first time we raced on this track, so it was interesting in more than one perspective. My competitors had spent all Thursday on the track, when I showed up at lunchtime on Friday...