rims

Hello to all I want to ask if rims of a ktm Smc 660 is direct mount on a Husaberg Fs 650 e 2008! Because I found a set of marchesini rims from 660 and want to buy.

W-T-B Dose anybody have 2010 blue wheels/rims off a 2010 450 Front and Rear.

Want to buy. I have a 1998 501FE. Looking for front and rear wheel hubs. Need hubs but would buy complete wheel assemblies. Want for supermoto set. So would also consider supermoto set. Thank you

Hello! Last year I picked up an 01 fx650e, it’s a great bike just hard to find the correct information! So I’ve bent the front rim and I’ve been trying to find rims from a US supplier. Warp9 offers complete wheels for an 04 Husaberg. I called to ask them if they could supply a rim and spokes for...

Was wondering what size rim and tire I would need for a 2011 FE 570 to start my conversion. Any advise and suggestions would be greatly appreciated

Wanted: 17" Supermoto rims. The front rim doesn't have to be exact fit, I have a spare front hub that I can use on it. I think there's a wider selection of rear wheels that will fit directly. Thanks!

Looking for a pair of enduro/off road rims (KTM) that will bolt straight on to my 2004 Husaberg Fe650e (currently set up for supermoto). found a pair of 2012 KTM ECE-F tires and wheels, will they fit?

Hello! I am currently looking for some supermoto rims to put on my Berg. And I am wondering which rim sizes you are running? I dont want to get a rim that will be rubbing against my chain, as I've seen some bikes that have that problem. I see you can get front wheels at 17x3.50 or...

hi fellas. bike : 2014 Husaberg FE450 (anniversary edition). current setup : off road wheels. project : want to fit a set of KTM Motard wheels . Wheels obtained. Problem : the 5 inch rear , when mated with a 160 sized rear tire , contacts the chain. Is there some kind of technique...

I bought a FS650 and didn't like the red wheels.[attachment=2:26suychn]Left hand side front wheel.jpg[/attachment:26suychn]. Please note in this photo that the spokes from the left hand side of the hub lace through holes to the right hand side of the rims centre line. In other words the spoke...

I need a new front rim for my 08 Husaberg,as it is bent,was going to do it my self will also do rear rim. will Ktm rims fit as i know the wheels will fit, i have had a look for rims not much listed for bergs but lots for ktm. can anyone tell me what are the best rims to fit,i would like to still...

Hi guys and girls I am new here and also new to Husabergs. I bought an 03 fe400e in January which had been stood for 6 years, so I stripped it and put in new bearings etc. I bought a set of ktm Behr supermoto wheels recently and tried to fit them today, when putting on the back wheel it seems...

2011 FE570 with the silver Excel AL7 rims. I just had the suspension revalved and adjusted for my weight (front and rear) by Bob at Pro-Action in Las Vegas. What a difference it makes - the stock suspension was just too soft. I took it for a lengthy ride yesterday to try it out. It just soaks...

i'm looking at getting a set of dirt rims for my 2005 fs650e. I know I will have to do something with the front brakes. my question is do the rims from a 2000 fe501 directly fit on my bike.

Is it possible to have Excel or DID make a white rim set, tubless with blue hubs and blue nips :? ? Iv'e looked all over the internet and I'm not having any luck.. :?:

I'm looking to buy a complete set of off-road rims for my fs605e. I guess the rims from a fe650 would fit but do I need any spacers or new axleshafts. where can I find a used set of rims.

So looks like the blue rims have got the flick for 011 :( All the web sites still shown as blue dirtstars,What are the new rims???? And does someone have a good pic with the new ones.. Cheers.

Hi, As far as I am concerned Excel uses little different spoke holes on their rims.Many stores and dealers recommend using only OEM or Excel spoke sets(actually nipples) on excel rims.But I want to use a SS spoke set on my wheel rebuild.Does anyone know if Moose spoke set (for KTM) fits excel...

So, i have a -99 501fe. the local symotic dealer said he could make me a supermoto rim set with the hubs rims and stuff, i would get the option to choose the colour of the rim, and every other part of the rim, heck i cud ask to get every nipple in a different colour if i felt like it he said...

Looking for some advice on buying rims on ebay. My 99 fe 400 has a 2.15x18" rear rim. is this size universal for all the fe models? Looking to buy another rear wheel to put a dot approved tire on it so that if i want i can ride it to work during the week and save my offroad tire for the...