restart

Dear community :) I finished the assembly of the engine. I replaced every parts of the carb. Identical to origin except main jet which was not available at 185 but 190. I have check the clearance of the valve to 1/6 turn méthods. The ignition plate set up is controlled as described in the...

Hi, I had a problem with my Husaberg 450fe 2006. It stall like a closed gaz valve. I have the empresion something is starving the carburator. The bike start on the first kick start that morning. Everything was working fine until it die after 3 km. It start and then die every one Km. If I ride...

hi i'm a new registered and a french guy. here's my problem i have a 2010 390 fe with about 105 hours and approximatively 2500km. last day i take a ride and heard some backfire when it was even cold. the bike was running badly like some "air holes?" i thought it was the gas level but no after...

What can I say anymore. I think this bike hates me. Got it back on the road again early this year after new cam failure. The smaller cam bearing surface worn down in the blink of an eye. Had the bearing surface laser welded back to new tolerances and put it back in, and also installed new...

Need a little help. I've got a 2011 FE570S. I've solved the hot fuel problem (wrapped the exhaust near the fuel tank and installed reflective material to the underside of the tank), replaced the factory fuel pump with the improved CA Cycleworks pump, have the FMF Factory 4.1 silencer, have...

Well it happened again. I was out riding at a OHV park messing around and I accidentally stalled the bike. It would not restart and the FI light was not flashing. I tried several times every couple of minutes and it wouldn't start. Finally I waited 15 minutes for the bike to cool down and it...

My first Berg love it. Only quirk so far, if I stall it say why rolling I can not just pull in clutch neutral, whatever, and start it. Roll to stop then hit starter it acts like battery is low. So far I shut off key reboot so to speak. Then it will start. Any thoughts, does this sound typical...

Hello, i have Husaberg FE 400 '03. Since i bought it i had problems with ignition, first, the stator gone legs up so i bought a replacement Electrex. It worked excellent for 2 weeks and than fried my CDI, so i bought a replacement CDI from HPI Ignition which is in pair with the Electrex stator...

My stepson and I had a great ride on fast rocky trails today and as usual the Berg did superbly, and I had no suspension issue after my weight drop. Actually, being in shape helps, go figure. Anyway, I did had a nice wash, and found myself with my left leg stuck under the bike and before the...