replace

Does any One Know if you can replace the fiber disc in the gear wheel torque limiter..? I found this fiber disc from a triumph on Google. I Know i need to cut it to the right size, but Will it work...

Hi I'd like to change the exhaust now.:mad::mad::mad: I do not have anything on FMF. Do you know any sites you can buy?:cry::cry: I do not care if it's akrapovic. Do you know? It's 2008 year.

Hi all. Wasn't able to find anything on replacing the auto decomp procedure so I have a question about doing it with out breaking the timing chain in my 2003 400. I have an IWIS timing chain that's riveted, the chances of finding a split link around here are Nil and it seems in excellent...

hey everyone, was wondering if it is possible to replace my whole magura clutch system(master and slave cylinder) with a brembo system on my 2011 fs 570? Im tired of the magura leaking and not working properly and the brembo system on my KTM has had no problems so i would just like to switch to...

Hello, guys at the moment i'm rebuilding complkete husaberg fe 550 3 2008 for hard enduro riding, i have become complete set of plastic but front mask is for me no go, is it a way to change the mask for ktm diamond style without changing a front fender ? or which mask will fit to original front...

Its hairline but all the way through....get a new one or weld this one back shut? Its on a road used fe600

I need to replace or clean my injector (2010 FE450). I can't seem to find instructions on how to do so. Are there any published instructions or photos anywhere? If not, can someone list the basic steps along with any tips on how to do the job without introducing new dirt? It seems that I got...

So i was riding down the hwy the other day on my 2004 fs 450 and blew up my head gasket just riding normal. Im good with engines, just havent really experimented with Husaberg engines. I was wondering how hard it would be, so i can save $400 from a mechanic doing it. Thanks

I would like to replace a possible slipping spraque clutch. Do I replace only the free wheel inside the freewheel gear or do I have to replace the freewheel gear as well?

So, my 05 fe550 barely gets ridden. It only has 5000 miles on it (240 or so hrs). The cam chain still has a couple clicks of adjustment left, but I figure I should replace it before long. I've adjusted the valves 6-7 times over the life of the bike, and they are always pretty close (i use the...

i have some mechanical backround, and have rebuilt auto engines before, but i've heard that the 'bergs are very different animals and require alot of care when rebuilding. the bike sat for a year or so prior to me getting it, and the gaskets for the valve cover and the cases are weeping oil...

one of my infamous loop-outs took it's toll on the bar mounted electronics and i need to replace them, i thought about the OEM stuff but decided that i really would like it to look cleaner. not have those ugly red buttons and the bulky bar mounted control for the computer. is there not an...

Hey groovers. Anyone know if I have to drop oil to replace the kickstart seal. I would think no? and probably is a silly question?

Guys, too bad I didn't read EVERYTHING in this forum. It's been a long time since I've been here. Too bad for me as I would have known to change out my rocker bearings before they died. I have a '00FE501E. I would guess I have around 100-150hrs on it though I don't have a meter. My bike is...

Hi Guys i guess you may be able to help me on this one, My 05 550fe has 150 hrs on it and i think its due a rebuild. It starts and runs fine and has always been serviced every 8hrs. I always change my bikes before they get to a year old but ive not used this bike now for 6 weeks as ive been...

What's the latest scoop on the 'alternative means' of not having to replace my SEM on my bike every other year guys? I've seen throughout this section of guys who rewind and rebuy the Stator/Flywheel bargain parts :( and I havn't yet been able to find an answer other than buying the same...

My '97 FE600E has only an oil SCREEN and a magnetic drain plug. I am trying to find out if an oil filter exists to replace my screen for obvious better filtering. Is there a way that one for a newer Berg can be fitted?Any info would be appreciated. Thank you. Volvonut

Hi, When do you need to replace the valve springs?

Hi all, I'm hooked on my 650. It does everything I want with huge amounts of "grin factor" and everytime I ride a lesser bike (read "non husaberg") I think to myself that I will one day have to replace this one with another one... Or will I? When my engine eventually gives up - it has to...

Hello, i have a question about when i should replace the connection rod on my FE 501 -97. The servicebook says 200 h but some people say that i should replace it after 50 h :shock: and some says that i can use it for 400 h.