reading

Where can i find the readings I should be getting on the early stators? I know that it has to be 1,750 red to black and 23 ohms green to black but I need to see it written down by the factory? cheers Taffy

I have an '09 US spec FE450. It doesn't have a ignition switch, simply hit the starter button and it starts (hopefully), If the bike doesn't start, how do you read any error codes. It seems the power would shut off before the codes are displayed. Or will the display stay on? Do I need a special...

I caught wind of a helpful link to Fork servicing over there, and thought I may sign up. After reading "The RULES" I was kind thinking I wont bother. Geez would it be safe to talk about any thing other then KTM over their with out being linched? Or did I read into the registration page a little...

Hi, After a few problems with my charging system and over charging batteries, I`ve got the charge rate down from 16.5v - 17v to 14.5v - 14.8v does that sound ok??? The bikes a 2002 FE400. Cheers Bob.

After reading the Doc "Carburation" need some help on words PJ PAJ PS what are this? thnx.

2 questions: speedometer tire set at 1790 reading 8km slow? i recently (3 months ago) set my tire size on my speedometer for a 17 supermoto front tire. however, it's reading about 6-8km to slow, which means it's also reading distance at a shorter range than normal. I.E i just traveled with a...

Been making some changes to the setup with Dale's jet kit. Clip now in 3rd groove down instead of 4th down as recommended. (needle drops to lean out mixture) Adjustable idle air scew at the recommended half turn out. Fuel screw at half turn out instead of the recommended 1.5 turns out. #48...

Just wondering where abouts if any can you take an Engine oil pressure reading on a FE 501e ? Regards BITE-ME.

Husaberg Speedo reading???? -------------------------------------------------------------------------------- I've got a late 04 Husaberg FE501 which I converted to Supermoto last year. Only thing is the speed read wrong because the wheel size. The importer told me to buy a new clock at...

I just finished my first valve adjustment (@ about 3.4hrs - '05 FS650E) and took a couple pics of the plug while it was out. I've got very little experience in this sort of thing, and while I *think* it looks normal I figured I'd post the pics up for comments by those with a more discerning eye...