radial

Looking for some WDS forks? Prefer vgc radial foot for sm caliper, axial mount would also be considered

So . . . I have an FE450 enduro that i want to run on the road in summer Ive bought a nice set of SM wheels and disks ( 320 front ) and the lovely caliper and master cylinder off the 570 SM or KTM equivuilant - but . . ovbiously it wont fit on the standard forkleg type fitting - I was...

Soo. Got my self some supermoto front dampers with radial mount to the caliper, and bought a Magura radial caliper. Big question, how is the speed sensor mounted on the FS570 ? -Can i use ktm part no : 76514068000 ? If so, do i need anything else ?

Nobody had heard of a radial tube when I went to the local bikeshop... I ordered the only radial tubes I could find, Bridgestone, but still curious as to the difference. Anyone? :bounce: Thanks, DB

Hi, i have a radial hand-break that comes all the way back, into the hand-grip. slowly, over the course of the last three months, it has lost it breaking ability. i bought this along with a KTM supermoto racer conversion kit last december from KTMcycle Hut . this didn't start happening until...

Anyone replace the stock FTE caliper with a radial Brembo? Is the caliper bolt spacing 100mm? Thanks, Mike

Anyone used one of these billet calipers and the billet mastercylinder? im thinking of buying the factory billet one, anyone got one? what you think of them? anyone selling one?

Looking to interchange dirt and sm wheels on an 05 fs 650. will the caliper hit the spokes on the 21" dirt wheel. thanks, edwin

One of my rocker arms has a radial play of about 1mm... The one on the exhaust side. When I push it back and forth, I hear a little "tick!" sound. I can see it move and I would think it's about 1mm. I tried to adjust with the #3 allen screw in the front but nothing. Or sometimes I manage...

Anyone got recommendations for replacement pads for the radial caliper? I ran this weekend on the EBC pads and did not find them to my liking they have too much initial bite, and no progression or "feel". On the 6 pot non-radial caliper I was extremely happy with the R2 pads (thanks for...