On the inside of the stock plug cap, should be a small spike or similar that screws in to the HT lead in the same way that NGK caps do? I ask the cap on my 390 has no spike, the lead just pushes in, doesn't seem very secure yet it still works and has not let me down.
Just bought an FCR off ebay, apparently from a 550 but has no choke, hot start or breathers fitted???
The jetting seems spot on and the bike has been transformed from the old Dellorto.
Has anyone else come across an FCR with no choke or is this common on older versions?
Not even any obvious...
What is it with Husabergs and starting off the button?
I have been out today on a shakedown test and the bike starts very easily hot or cold with the kickstart, but will not catch and fire with the electric start.
It is turning over strongly with no spinning from the sprague but it just...
Hi,
I have been suffering a slight front end push on my Berg 550 pretty much since day dot, I have more recently spoken with my Berg Dealer, and inquired as to wether pushing the forks down a little further in the clamps would make a difference.
The forks are currently set on the second...
I got a Mikuni TMR41mm carb on my 2002 650SM. When I turn the mixture screw in and out it has no effect on engine RPM.
Do I need a smaller or larger holed pilot jet ?
I don't know whether its an air screw or a fuel screw.
Also there isn't much difference between the choke on and not on...