This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

procedure

  1. K

    Staring procedure kick start bikes

    Since the bike is a beast to kickstart I'd like to get some tips here. My bike is a 600 with kickstart only and the kick starter actuated decomp mechanism. I have kick started it a couple of times but I've yet to find a solid procedure. Most places I've read states: "Work the kick start...
  2. M

    proper coolant flush procedure for 08

    Hi The other week the bike got hot a couple of times and I could smell coolant (even though I couldn't see any) so I was thinking it'll be a good idea to flush the system. 1st question is can I use the Maxima Coolanol (pre-mixed, says it's for use on motorcycle and ATV's) ? 2nd question, what...
  3. M

    correct kick start procedure?

    I tried kicking the bike on a few different occasions but couldn't. now I know it works because a fellow rider helped me when we were out on a ride but he just played with every thing not really knowing what he was doing. Are there any Do and Don't as far and kick starting the bike? like not...
  4. K

    09 Battery replacement procedure

    The battery has finally given up on my 09 HFE450. What is the process for removing it? i have taken the 2 screws out of the black plastic cover.. do I have to remove the fuel tank or is there something obvious I am missing?
  5. velosapiens

    camchain replacement procedure, remove head? (05 fe550)

    So I got a cam chain, and valve rocker arms, and a local engine guy is doing the work. He's very experienced with ktm, but not so with husaberg. Apparently on some ktm's it's necessary to remove the head to replace the cam chain. Is that so on the berg? Anyone got a link to a quick outline of...
  6. 5

    Swing Arm Shock seperating procedure

    Ok Boys, Just spending Sunday morning doing some more set up work on the 550, I'm taking out the swingarm to check / grease bearings etc...I've pulled the hex head bolt out of the bottom mount of the shock \ swing arm area and there's no doubt a pin that needs to come out in...
  7. VooDoo

    Breaking in procedure

    I will be taking delivery of my 07 Fe650e sometime this week. This will be my first Husaberg and first 4T. Regarding the break in procedure, should I follow the user manual instructions, or is there is "better" way to doing this. Thanks in advance. Great site btw.
  8. Parsko

    Starting Procedure

    Okay folks, bear with me on this one. I know it's been covered before, but I wanted to get something straight. It seemed to be established that I was the Husaberg starting guru at the ECFR. Not sure if it is my young leg, or technique. But, taking age out of the question, I wanted to...