pls

Has anyone got the wiring schematic for a 2010 FE570 UK spec? I'm struggling to get the horn working. Switch is ok, but no volts getting to the horn. (Horn works ok direct off of a battery). Had to cancel the MOT test today because of this-can't ride it on road till it's sorted. Husaberg .com...

Hi! I have had some metal bits in magnet several times as I checked, now I started to take the bike apart to see what's up, And I can't get the shaft out from the swingarm, the one which holds the engine in place. It seems to be stuck. Any ideas, suggestions? Cheers,Tom

Bike starts fine but when hot miss fires and cuts out! I have had it serviced and carb cleaned but it still kept doing it. I've replaced the black box under the seat and it still keeps doing it! Is it the coil? Can anyone help pls? I haven't had the bike long and im desperate to get out on it.

Hi guys Please help have an 09 570 thats well maintained and has had a new top end 30hrs ago, recently changed the pipe to an akra slip on with the insert in and changed to a new air filter just the stock twin air type, use a light foam filter oil and dont over oil it well im not sure but its...

Hi Guys, Just need some quick help pleas, have tried the repair manual (really thought my answer would be there) and the doc but to no avail :?: I am in need of the part numbers for the two rubber seals in the steering head, I have souced the bearing no's but need the seal as well. 2005...

I am about to buy my first berg after having quite a few road and dirt bikes.... I am having trouble getting feedback from anyone on the FS 570 here in Aus.. I understand most convert the FE to SM.I have posted in the general section to see if anyone knows what is a good price for a new FS 570...

Well, being a clown, I crashed the mighty 'berg today. Grabbed too much front brake at reasonably low speed and lost the front. Smashed the sucker into an armco barrier. Anyway, need a few parts. - front guard - clutch reservoir cap (the bit with the decomp lever attached It's an '05...

hi,,will be picking up a new 450 09 next week.its the first time iv ever owned a 4t so totlal tourist about maintainance ect im average rider & it will be used 90% greenlaneing so would be gratefull if u guys could help out.. 1,what best way to run it in,have herd conflicting ways 1,run it...

fc is supermoto i think but what is fe and fx. i have year 2000 501fe abd my engine broke u guts thunk i couls fit an 1999 fx600 engine in it if i change carbu.. and exhaust. im just an beginer with bikes and learning :)

Hey guys and gals my 01 501 ate the small roller bearing that the starter freewheel rides on in the transmission cover. all that is left is a small amount of outer race fused to the case. Any hints on how to remove it without dammageing the cover anymore than it is. I also need to remove the one...