plates

Hey guys, I am in the middle of rebuilding my clutch and I've lost photos of it before (been a while since I disassembled it). For the love of God, I can't remember the orientation of the steel plates and the order of friction/steel plates. Can someone confirm please?

Anybody got a set of drive plates for the above clutch? Went to install one I bought off this site and noticed the plates were missing (after I took the bike apart). RMS 826 is the kit number. Checked the Rekluse site and it looks like it's nla.

Hi guys I'm after the following - bash plate for 1998 FE600E - skid plate for 2000 FC 501 Cheers Kevin

hello guys, i intend to change my current original headlight with a number plates, but i am not sure that it will fit with my fender, what do you say? have anyone did this? i know i have to take off the black plastic thing between the headlight and the fender. btw i intend to get a husqvarna...

Other than OEM any options? Only used as a trail bike so breaks my heart looking at the price of the OEM fibers. If anybody has codes of a Ebc or other model that should work, I was guessing Ktm ones should fit?

Hey all, Just picked up a FE 390 It's plated in PA. Will I have issues plateing it in NY? Any input will be appreciated

I've got an '08, and my first oil change, I didn't remove the skid plate because one of the bolts had become one with the nut, and I didn't have all night to deal with it. So, changing the oil without removing the skid plate made quite the mess. But, the location of the skid plate mounting bolts...

we're launching our web shop in the next couple of weeks and this is one of the new items I'll have on it. I've had two sets of engine plates on test and I'm pleased to say folk could feel the difference. fits up to the end of 2008 models. these are the test copies, splodged the monicer...

Hi guys! Clutch related question for you. There is 7 steel disks and 8 clutch disks. The repair manual says, that you have to install first one of the steel disks then clutch disk and so on.... Okey, no problem there. BUT one of the clutch disks have only friction material on the one side...

Ok, other than OEM, there is not a listing for an aftermarket company for clutch fiber plates for the new style Husaberg. Which KTM clutch fiber plates cross over? I figure it would the same as the most of the 450/530 KTM's but want to check.

I am having troble finding the part number for the rear brake pads Retaining plate set. I't is not in any of the part manuals i have, they only show this set for the front but no mention for the rear. Part no for the front 546.13.212.000 Regards The Force

I have three husaberg bikes that I just recently purchased. 1998 fx600, a 1999 fx600, and a 1999 fc501. All three of these bike have been sitting for who knows how long. I cleaned the tanks and carbs out and changed the oil. they all fire up and run, but I think the clutch on at least one is...

It's here and vary cool !! 8O go to www.Hyderacing.com

For my fc600, for some reason the 'new' ones that were fitted by a dealer seem all dis-coloured, like over heated. I personally think they were old ones cleaned up with wet and dry, but hey-ho. They also are concaved, this is obviously not right, unless someone can tell me otherwise. Cant...

Hi, is there any Husaberg owner in New Zealand who has a couple of old inner and outer clutch plates that would fit a FX 470e so I can make a clutch locking tool. Cheers, Stu

as it says i need a set of clutch plates and gasket set for my husaberg fe400 (2004) i live in spain and want them sent to me here. cheers stu.

Hi Need a clutch plate for the weekend. My dealer is miles away and i havent got the time to travel. Does anyone know if any other bikes use the same plates. We have no local Berg or KTM dealer. Regards Ady

I am really wanting an SM650! Does anyone have any info/experience getting plates in mass? I know the mso doesn't have any off hyw label. Is that all that matters?

Hi, CODan here. I have a friend that is a Husaberg dealer. I make some pack and bag accessories for dirt bikes. Anyway, he told me that the only good skid plate you guys can get (with good waterpump protection) is from Italy and that it retails for about $160. Are there any others...

has any one ever had problems putting 99 plastics on a 98 bike. the side plates just dont seem to match up on the mounting holes