plate

Hello, does anyone know the reference number for the MX number plate in white or blue for the 2010-2012 models? the FX450 had an MX plate, but I can't find the parts to order from the dealer. Greetings and thanks.

Hello my Husaberg 550 Force has a yellow plate holder.I'm not sure if is original someone has the answer?thank you Fabrizio

We are rebuilding a 2011 FS570. The entire bracket that held the license plate, taillight and directional’s is gone…. The plate is currently zip tied to the rear fender. The brake light is a LED strip light mounted in the wheel well in front of the shock and there are no rear directional’s...

We are rebuilding a 2011 FS570. The entire bracket that held the license plate, taillight and directional’s is gone…. The plate is currently zip tied to the rear fender. The brake light is a LED strip light mounted in the wheel well in front of the shock and there are no rear directional’s...

Hi all! I'm struggling to find the compliance plate on my 09 FE450. Can somebody steer in the right direction please? Cheers! Brett

Oh you lucky people! i have been sitting on a whole bunch of rear licence plate/tail light holders and had been tracking down the tail light. I had some good luck last week with one owner - Dominique - from France having an original light and lens. It seems odd that i'm looking at a new...

Hi! How much is necessary to remove to remove the sliding plate on a 550 -03 engine? Only the clutch basket and some stuff or split the engine? Part #80034008000 Best regards

Hi Guys......thanks for letting me join! I have a one owner from new HUSABERG 450 FE on a 58 plate live MOT.....the bike is totally immaculate, starts hot or cold with two revolutions, new extremely light weight lithium battery, new soft touch pro grips, spare plastics, new gear lever, lights...

G'day all. Force accessories have decided to do another run of their tank/plates that hold 4 litres of fuel down low maintaining slimness and handling. If your interested give them ahoy. [email protected]

Has anyone made or purchased a bash plate (or skid plate) for the 89-93 model Berg frame with the "Factory" bend on the middle bar under the engine? If so could you send some photos please. :spin:

hello guys im from switzerland and i search a pic, scan (from the front)... from an original id platte for making one new. without this i can not make the moto street legal. thanks for your help!! http://www.powerwheelie.de/uploads/monthly_2017_04/IMG_3197.PNG.cc0ab08aa961d64bfa1cdd25dba592bb.PNG

HI, any one could help me to instal the alu factory skid plate on my 2010 390? I've find two little holes on the bottom frame, just on line with the 2 holes on the plate, but closed by a pair of plastic cover. Trying to mount the alu skid plate, after have been removed the original plastic...

Hey guys having just rebuild my engine and got the thing timed up to a T, i have now found out that the decompression lever on the engine cover on the right side does not return to its original position once the decompression lever has been pulled so that i can kick start the bike as the...

G'day all, I have spoken to Force Accessories about a tank/plate to suit the 70 deg berg. I have one fitted to my 570 that carries 2 litres as it was a water tank but I want to carry some fuel and more of it. This is an ideal spot to carry fuel being nice and low and these bikes having the...

Hi there new to the forum,just taken ownership of a 2012 berg te300,awesome bit of kit I love it,I'm looking for a plastic bash plate,front disc guard. Located in uk

This came of my 2011 Husaberg FE 570 but it will fit other models too. This has been used for less than 300 miles on the bike. I had a different fender on my bike that also had a took kit Anyways since I sold my bike I dont need this. I am asking 75$ + shipping ( via USPS).

(posted in SM forum as well, but seems pretty quiet over there) purchased a support from motostrano for my 2011 FE570 so i can run a 320 rotor up front for street got the new support mounted all up with the brembo caliper. i tried swapping out the oem guide plate (second shot) to the new...

Hi all, purchased a support from motostrano for my 2011 FE570 so i can run a 320 rotor up front for street got the new support mounted all up with the brembo caliper. i tried swapping out the oem guide plate (second shot) to the new support and it seems to push the pads too far down to get...

Got a husaberg390 ... Does anyone else have a problem with brackets pedal/ step plate being way to close to engine. It's like 2,mm gap, I bought a RHK plate to go on it but it's exactly the same.

Hi All. Not sure if this is the same throughout the world but in the UK a number plate must be displayed on the back of a bike like this. I think the size really spoils the aesthetics and look of the bike. A number of people I have seen have smaller and smaller plates which are likely...