pds

WP Suspension 5018 PDS 2003 Rear Shock Absorber Workshop Manual For 2003+ Husaberg motorcycles Rear Shock Absorber

WP Suspension 5018 PDS 1999 Rear Shock Absorber Workshop Manual For 1999+ Husaberg motorcycles Rear Shock Absorber

Hi, I have FS some parts from my 570 Husaberg. WP 48mm forks made for supermoto - I will add spare springs for MX/enduro.. 350EUR WP PDS (only for 09-12 Husabergs) made for supermoto - I will add spare spring for MX/enduro.. 350EUR GDS triple clamps 14mm.. 220EUR Akrapovic silencer -...

Does anyone have any experience with progressive rate springs for the PDS shock? I think the progressive rate may interfere with the damping settings, meaning the damping may be hard to dial in correctly. Is this true? I have to stiffen up the rear and I have the option to go progressive or...

Please take a look in your garage. Otherwise I have to buy new.

looking for a couple of pages from a later manual than the 2003 we have here. unfortunately that manual doesn't cover the DCC just MCC. anyone got the later book, sheets, download with the DCC? regards Taffy

has anyone found a cheaper plain bearing for the pds rear shock at $300aus its abit rich i was just wondering if there is an alternative out there.cheers flatchat

I talked to Jeremy Wilkey today and he was quite excited about this article. http://www.mx-tech.com/?id=articles_new ... &type_id=1

Can a KTM PDS upper fit on a Husaberg lower shock? Yes, with some minor modifications. I went this route to try the larger reservior. It's much better. This upper body is from a 2004 KTM. You can go to my web site to see more Husaberg.US under Suspension>KTM PDS

the PDS rear shock doc we're all able to download has a few basic items missing. can anyone help? the exploded view on P2 has no index. our parts manuals are barely the same. on page 34 we're told to get a separate manual to work on the DCC nut. the dual compression set-up. the...

What are the procedures to bleed air from a PDS rear shock using the 'hydraulic pump motor'? 1. Where to connect the pump discharge hose, on the rebound hole or the high/low speed hole (I have the adapters)? 2. Others air bleeding procedures that must follow... Thanks. :o

Can anyone provide me with a link to the PDS shock manuals and valving charts. I am specifically looking at upgrading the valving in my 1999 FE 600 E PDS to a later model. Any link to how the PDS works as well as manuals would be helpful. What I have found so far makes me think that the...

Who can I find a manual for the WP shock absorber, fitted in a FE 1998? I have the fork manual, but not the damper.

Just out of curiosity is the frame geometry of the PDS bikes different to that of the earlier models with the WP or Ohlins linked shock or are the spring rates and damping completely different. The 97 FC 501 that I have (WP 50mm forks and Ohlins shock) doesn’t get head shake even with the...