pad

I'm replacing my read pads and disc, And my 2007 FE Berg has the Brembo Brakes. I'm removed the cotter/split pin, But the "bolt" holding it in doesn't seem to want to come out.... Any ideas?

Does anyone know the part number for front brake pads for a 08 fs650e? Are there any options for different pad compounds? Thanks

Subject line says it all... I have a '10 FE450. What are the OEM pads? Sintered or Carbon? Pros/cons of each? I've found the following: Carbon - less heat Sintered - better for mud and sand, hotter, last longer, hard on rotor Thoughts???

Guys, I've run 2 sets of OEM pads through my Berg (08 FE550). After a weekend playing in the mud, it seems like I'm due for another set (at least in the rear). So I pose the question; what brand / composites are others running for these bikes? I'm guessing it’s going to come down to conditions...

Ok, stupid question. Any trick to getting the pin out that holds the rear brake pads in place (2000 FE501) I pulled the little keeper out of the pin & the pin spins, but won't slide out easily. I thought I would ask before I get out the vise grips and hammers. Thanks Dudes ! Later Ron

I'm replacing my rear pads for the first time and noticed they have a shim and insulator from the factory with Braking brand pads. I realised this could be why I haven't had the "ktm squeal" like the orange bikes have. (Or do they have them too?). While installing the new EBC pads, the package...

Fitted new rear brake pads last week and took the bike to the track on Sunday for 3 hrs. When checking the bike over before going out again last night, I noticed the rear pads were worn down again TO THE METAL - no pad material left! I wasn't riding around all day with my foot on the brake...

so this brake only has 1 cotter pin, and appears to have 1 allen screw looking thing on the left side holding the pin in. naturally it's extremely flimsy and stripped out instantly when i tried to get wrench on it and turn it. before i completely ruin my entire rear brake caliper, can someone...

ok so im an idiot please help. I worked on this for about an hour and a half thismorning trying to get the pin out of the rear break assembly. i have looked at the shop manual and the owners manual both state remove the cotter pin from retain pin and remove pads by pulling out retaining pin WTF...

Anyone got recommendations for replacement pads for the radial caliper? I ran this weekend on the EBC pads and did not find them to my liking they have too much initial bite, and no progression or "feel". On the 6 pot non-radial caliper I was extremely happy with the R2 pads (thanks for...