output

I'm planning on heading to Baja early next year. The plan is to avoid riding at night but I'd like to have serious lighting just in case... it'll be useful around here anyway. I have a BD XL Pro headlight on the bike now, which I believe draws 40W. It appears the stock bulb is 35W so I'm...

Anyone know what the power output of the alternator on the 2010 FE570 is in either amps or watts? Can't find anything in either the OEM service or owner's manuals. __________________

Hi again dudes! Is there any easy way to check if my FC550, '01 have any 12V output? I'm thinking of putting on a led light.

Hi Guys, I'm thinking of upgrading y factory Stator now that I have the light kit, fan and maybe add some more accessories. I remember seeing an high output stator on Bossoffroad.com but can no longer find it. I did find this kit from Trail Tech (SR-8313), any thoughts? anyone have any...

I have a 2011 FE 570S and am looking to a Baja Designs http://www.bajadesigns.com/ProductDetai ... ber=490003 light to my bike but am unsure of the stator output and whether or not I need to upgrade. Does anyone know what output is on this bike or where I can find that information?

I'd like to know what the wattage is on a stock TE 250 or what the system capacity is.

Anyone know the regulator and stator output capacities?

I'm running the Trail tech HID head light with two 35 watt bulbs. I want to stick a trail tech 35 watt flood beam on my helmet and power it trough my motorcycle. Question is what is my FE570 pumping out?

Newbie owner here from Ohio. I just happened across a good 98 FE 400 and it followed me home. I need to get some lighting on it and have a dual 100 watt PIAA setup off of a XR600 and want to know if the stator can handle 100 watts ? Also is it AC or DC on the lighting output. I like to run...

Hi All, Just finished my final testing of a standard rewound Kokasan core with standard flywheel This is for maximum alternator output. Regulated rectified 12VDC With the standard flywheel it's making 120W max this is from the reg/rec to the battery @ 7000 rpm 14.14 VDC at the...

The manual indicates the 05 fe550 has a 150W generator. Does anyone know if that is the rating for the AC output from the generator or the DC output from the regulator. I suspect the 150W rating is the AC generator output. If this is true, anyone know the wattage rating of the regulator...

Hi all, I am putting a light on my 02 470 fxe. I was checking the voltage from the bikes stator and found only 8.8vac, once hooked up to the regulator/rectifier, I had only 9vdc. When I increased the engine rpm, voltage would rise to 10.5vdc, but as rpm increased, the voltage began dropping...

Hi all, Is there any call for extra lighting power on the Kukasan ignition 2004 2007 and how good is it in general? I had an e-mail in today from a guy in Finland asking if the lighting output could be increased. I could probably get about 150 watts out of a rewound one but this would...

right fellas had to replace all the gearbox bearings and was stumped initially on the output bearing. that to you folks is the one behing the 'front sprocket'. it's a roller bearing in which the inner race can flop out the bearing and leave all the rollers dangling there. having...

http://ktmtalk.com/index.php?showtopic=114182

i have just recieved a dyno chart (WINPEP 250) of a 05' fc 450, i think that it is the best 450 dyno chart i 've seen.. my scanner is a bit f_ck_d up at the moment so i will post the values: R.P.M.----------- HP 4500-------------25 5000------------27.5 5500-------------31...

so is it true that the older 600 engine has the highest output of them all does anyone know the true output at the backwheel standard that is ????

to lineaweaver or other tuners ; How much HP you have on tuned husaberg 650????

Have a fe450 04 planning to do some night riding what is my output and wich is the best way get max output for lights