oring

Correct way to install water pump seal Hi everyone, I recently purchased a husaberg fe400e 2002 model. there's a bit of a water leak coming from the wheep hole. The guy before me had done a lot of work to the bike and had actually put a new water pump seal and in, after reading quite a...

Hey, i ride a husaberg fe650 2003 taffmeister upgrade. I have a problem. When i ride a little bit the o-ring att the kick axle slides out and it becomes a oil leackage. Is this normal? Are maybe the o-ring to small or the kick axle has slide a little bit out? From the kickpedal to the o-ring...

Hi guys my name is Ray I'm from Australia and I recently took ownership of an 04 FE650 with just 51 hours and 2600kms on it. It did however have a flat spot down low in the revs. After inspecting the carb I found that the accelerator pump nozzle was blocked, after many hours of trying I could...

Anyone know what size o-ring I need to rebuild my clutch slave cylinder? The parts book only has it with the piston for $42. I'm sure all I need is a couple dollar o-ring. Thanks, Mike

Hi The bike is 2005 FE650 and i need O-ring for waterpump 10,00x1,30 NBR 70 SH (code 0770 010013) but the problem is - i cant get anywhere this size. Only size i can get is 10,00x1,50 is it ok to use little bit bigger O-ring? The gap is only 0,2mm

Hi, I want to get some response in this issue. I have heard that you shall put the chain in thin oil. Why do this when the o-rings shall prevent water to penetrate the links? It should prevent the oil to penetrate too? One back draw is that the oil on the chain collects dust which increases...