offset

Evening bergers! Im curious if anyone tried fitting the KTM 2003-2004 125MX 14mm offset triple trees on a 570? Reason for asking is Id like to try a bit radical chassis setup on my 570 for this seasons ice racing, which likely requires means to bring trail back again. I love to keep things...

Hi there, I am willing to replace the OEM magura radial caliper of my FS570 with a brembo (..I already got a 15 rcs mc). I was wondering if the brembo caliper P4 30/34 100 mm motard radial (XA78910) would fit my OEM front wheel and braking rotor, plug and play?. I read offset of the brembo...

I got my triple clamps today. Yes they still make them upon demand. Trick billet adjustable clamps. Im very happy about it. Part number for bottom ending in 016 and top 017. They both are stamped with 017 ending. Very cool. I imagine since they have the adjustable stem they are set at 16 with...

Many of you will know that a Husaberg converted to roadbike use needs around 17mm-18mm offset depending on your preference! I'm hoping to get a batch of 6 made that cost around 250gbp in anodised iceberg blue'. would any of you be interested in these? CNC milled by a respected french...

Howdy: Looking to swap a set of forks into my bike, and wondering what the axle lug offset (distance between the center-line of the axle, and the center-line of the fork legs - as seen from the side) is on the later model closed cartridge Husabergs (with the 48/60 forks). I have searched all...

I've read pretty much everything I can find on the 18 vs 22mm offset TC's. I have a problem with the handling of my 2009 FE450 that I haven't been able to tune out with suspension work, sag adjustment, or fork adjustment in the TC's. My issue is with front end deflection at slow speeds and the...

hey guys, I am in the process of converting my 2004 FE450 into a supermoto set up. and in the heat of the moment i disassembled my rear rim without first checking the offset? Can any one confirm that the rear hub is centered on the rear rim. i plan on inducing some offset for tire clearance...

I have ridden the ol' 570 for two seasons now and being built like a brick outhouse I lover the fast steering but my mate Husaferg being of a somewhat more delicate nature reckons they're hard work. I have the 18-20 clamps but I believe I have the 'central' rather than eccentric TC/Yoke post...

Hey, I was wondering if anyone knows how 20mm offset triple clamps off a 10/11 KTM 530 EXC will work on my 2005 FE550 E, I smashed the originals in the process of smashing my leg. I found these ones on ebay and from my research they may be an improvement over the original 22mm TC. I have never...

having had a few rides now on the 570 and raced it 4 times as well I can't see how the clamps need to be anything but the 18-20s that are in there. the bike will only fall at a certain speed due to its mass. it may over steer with the smaller bikes and 20-22s be better but with my 570 the...

Hi Guys, Not on a berg but it helps to explain triple clamp offsets. [youtube:vwf8qy3l]http://www.youtube.com/watch?v=1RG0TUul9Jo[/youtube:vwf8qy3l] Steve

I ended up with a set of adjustable triple clamps and installed them in the 22 mm setting. I didn't really have an issue with the stock clamps set at 19mm, but figured it was worth a try. Anyone here like or dislike 22?

Ok, i think i may have mucked up here and need some help. I removed the upper triple clamp on the berg and replaced it with a BRP clamp off of my ktm. The reason being the BRP has the risers and sub mount kit all attached for my scotts damper and is a nice bit of kit. So i fitted everything...

I looked and could not find the data. Does anyone know the offset of the triple clamp on an 04 FE 650. I recently bought a newer second bike. The two bikes handle way different. I am trying to understand why. The new bike has an 18 mm offset.

Hi all, I currently have a front rim (1.60 ) and hub to be reassembled on an 03 FE650. As it will be sent off to a shop as I dont have time, I need to furnish the guy with the offset spec for correct alignment. Does anyone have the dimension from edge of rim (widest part) to outer edge of...

Hey! Racing SuperMoto on a 650 berg.. what affects will you get if changing offset from 16 to 22 or from 16 to 13. Does the ride hight change in the front if changing offset also?

rode a FX470 at the weekend with a dell orto fitted and it was noticeable how strong/violent the thing was from a closed throttle. i just checked an old thread on a race last year and spotted the same comment when i borrowed a FE400e from colin spicer. even the 400 jolted me...

I was wondering if the offset on a 1998 FC is more or less than a FE model? I just purchased a set of triple clamps off of a 1998 FE501 and the offset is 11mm and that is from the center of fork tube hole to the center of steering stem hole. When I measure the OEM clamps on my FC501 I get 17mm...

besides makka doing it, has anyone else been fitting KTM TCs and their 18mm offset? experience? regards Taffy