nut

Does anyone know whether the shaft nut on the clutch side can be bought somewhere or do you need to buy the original?

Hey all, I need to do some adjustment to the chain tension on my 2006 FE450. I don't have any metric sockets big enough and no reliable way to measure at the moment and want to make sure I get it right before I buy one. I'm guessing 26-27mm? Thanks in advance!

Hey guys I just got a husaberg 501, not sure of the year but I believe it is pre- 96.. When I got the bike it was a basket case because the shift mechanism needed fixed I fixed that now on reassembly I found that the only missing nut is the flywheel collar nut.. I live in Ohio USA and their are...

Hi fellow riders, I recently bought 2010 FE 390. I have a street bike, but this is my first off road bike. I like to keep my bikes in best possible shape. So... Some nut inserts that hold the fairing on the tank / airbox are missing. Some of them are stripped. Currently the fairings are...

Looking for a steering stem top nut to fit my 97 fe501e. The nut that holds the top triple clamp down. It was missing when I got the bike.

Gday all, I have been looking for an aftermarket kit like the "Bolt" brand of replacement fastener kits. So far all of the kits have the torx head bolts. Not a major issue, but my 04 have any torx head bolts so I was trying to keep it original. Besides ordering OEM and paying a squillion...

what is the spindle nut size for the primary nut (front sprocket)? 07 Berg 550 FE

Hi, do i need the decomp stop nut even if i have a new decomp that doesn't use that one i was thinking of the balance

I searched I swear! :D Would anyone happen to have the torque spec for the clutch center nut for the FE390? Thanks for any scoop! Lee

Howdy peeps, from ya bro down under. just starting the big rebuild on my 04 650 an i've got stuck already Tell me. Is there a simple way to undo the balancer shaft nut? (other than the obviouse spanner socket etc). I have got the clutch and crank nuts undone but cant see an easy way of cracking...

Hadn't ridden my FS650C for several months and after setting the valves yesterday and starting the motor, I heard a rattle that I had never heard before ( did not have my helmet on at that time and could hear better) . Definitely in the clutch / primary area. When I snick it into gear and begin...

a friend just traded for 07 450 and it sounded like a thrashing machine. everyone kept saying husaberg sounds like that, but seemed to me to be getting louder from clutch cover side. i had a 03 ktm 525 once sound like that and intermediate shaft nut came loose and sounded just like this husaberg...

had this trouble before so when i came to my first bike with a lose gear on the woodruffe key i had no hesitation in using an old cure. holding a long peice of lockwire, feed the wire to the side of the woodruffe key and then get the gear on and started. then tap the gear down the...

Stripping this 4681 rear shock, and the 22mm piston rod nut is proving very difficult to remove. There is no damage to the shaft threads. On top of the nut either side of the rod close to the threads is a small indent, it also looks like its had green loctite on it. So my question, is it safe...

Just thought i would join in with all the fun Brought a 2007 650e don't no much about it only that is better than my old 625 sxc and it looks the dogs also i have no hand book any thing i urgently need to no, eg oil change intervals etc. cheers Allan.....

Is there a special tool you must use or can a tool be made to tighten/loosen hex nut holding inner clutch hub on 2006 model.

Hi folks, On my FE501e (2004) I ran into a little problem. While riding suddenly oil squirted out of the left side of the cilinder head. I turned off the bike right away. Little research learned that the nut/screw on the left side cilininder head came out. I checked the parts manual and found...

Make sure you put some lock tite on your steering head nut....it will rattle off....mine did yesterday and my friends did it last year after a few rides.

where can I get a steering nut wrench??? motion pro was no help. part #?? LT

Hi, How hard shall you tighten the nut steering head top?