numbers

Hello to everyone,how its going?hard with this lockdowns with this virus but what we can do,i hope the best to everyone,one question again just for the second cam what i have spear from the first owner what he give me extra parts its this number on 23/02 01 do we know what is from what...

Does anyone know if Dirt Tricks makes counter shaft sprockets that fit the 2007 FE550E ? As per their online catalog, they do not. If yes, please post the part numbers that fit. Thanks.

could anyone please let me know part numbers for 2006 550 lower shock bearings?also chasing a new bump stop,where would i find one? the old one is a mess.cheers

Having a terrible time with a top end or complete gasket set for my 09 570. Ever listing i find for head gaskets list everything from the 390 to 570 useing the same gasket. I know that aint right. I am trying to get athena to help me but no luck so far. Does anyone one know for a fact a...

Does anyone have info on the Husaberg yearly production figures before they were bought out by KTM?

Hello guys, So i have a fs650 '04 with a broken valvecover. Got 2 550 and 1 450 covers and partnumbers match. But the right side has a 4 digit number stampt on head and cover. They match as a set. But my question is are they interchangeble (do i say this right?) and why do they match in...

My search yields nothing regarding this. Will US vin number show that it is US Berg? If I bring it over from US in parts, then go to register it will ministry of transport know from vin? I am getting impatient trying to get 650 in Ontario and no luck since March. In US there is more of them. Pls...

This is My first time on the forum. Is there information out there on how many husaberg FC 550s were produced during 2005 ?

hi everybody and all berg riders..i would like to ask you where i can find the new parts numbers of husaberg fc470/2002...so i can order from taffy that as i see he is the only one that haw stock of husabergs parts..thanks a lot guys. my best regards from greece.ride and enjoy.

Does anyone know the bearing and cone numbers for the triple clamps I want to go to my local bearing store and pick some up Thanks Frank

Hi, I'm trying to reassemble/reinstall my original clutch disks after removing a Rekluse that the previous owner installed. I notice the OEM friction disks have two sets of numbers stamped on them, while the OEM steel disks come in two types. Putting them back in the correct order seems to be...

Hi all I've seen this subject addressed, but never cleared, specially for the 2001/2002 engines, because the 2003 engine will be different outside (magnetic bung, and head bleeder screw). My idea is that all of you that still has this bikes put here your engine numbers, and that way we will...

till 2003 the motor numbers were on the right leg side and consisted from 7 digits, concrete example: 4013198. this is a real number on an engine from FE400e with a sleeve and water pump down (not on camshaft). That means it is younger than 2000. But I am not able to determine the exact year of...

My new 2011 fe 570 only had a 90 day factory warranty so it was necessary to perform all severe stress testing immediately while still under warranty. One of the first stress tests was a series of speed runs on interstate 279 near Pittsburgh PA. The first test runs were with the stock gearing...

Just looking for a baseline reading of compression for a FX650 with cam decompressor. Yes - I am aware of the theoretical AND that a leak down test percentage loss is by far a better way to check - however I am currious to know what other people are getting. Now that our R6 starter mod is...

Hi Can someone help? after I tap the ignition button of my 2011 fe570 I see 4 numbers quickly flash up on the digital speedo display before it goes to the engine hr screen, I think from memory the numbers were 2205, does anybody else have this? is it meant to be the date? time? it only flashes...

Hi, Just bought an fe 650 berg. It is an 02 model, confirmed by chassis number, the confusing bit is the 651 first 3 numbers on the engine. Please can anyone confirm this is correct for this model. Thanks Garry.

Hi everyone i am new to the husaberg world!! i have jst part x my 2010 ktm sxf 450 for a 2010 husaberg fe450!!!! Best decision i have made i have not been dissapointed yet! i have found the vin number on the frame by the handle bars but where can i find engine numbers to match the frame numbers...

I have just purchased an 04 FE 550 with a blown crank. Can anybody point me to a new/s hand crank and piston? Rest of the motor is perfect. Is there a better fix for this model. Do not know a lot about the early bergs. Am I better off with a later engine? Whats the best way to fix this??

Hi Guys, I have been offered an 08 FE550 but the frame numbers seem odd, they are nowhere like my 06 FE550. (They seem uneven and possibly hand punched) Can someone tell me what the numbers for an 08 FE550 should read like? The price is right and it has only done 20 hours, but it just doesnt...