newer

so i thought this might be of some interest for people with pre 03 husabergs wanting to fit newer wheels from ktms. last night i bought some wheels (26mm spacers) from a 2011 ktm they were talon hubs, ... and i made them fit without any money spent. ok the rear wheel although being 26mm had a...

I like my 99, but I hate the styling. Anyone know if the tank and rear plastics from a 00+ bike will even sit properly on the frame, or is the 00 a complete redesign? I can deal with different mounting point locations, as long as the parts physically fit on the bike. Will i need a 00+ seat as well?

Can I fit '07/'08 rad shrouds on an '04 FE450? I heard once you can do it with an '07/'08 tank but I wanted to double check that's all I would need. They look far better (in my opinion) to the '04 ones. Next question... Are there any differences at all between '03 and an '04 FE450 frame? The...

I am (was) 6'4 245 lb. 53 and I have decided to buy a new bike and set er up for trailing. I have a 2004 550 FE that I bought new and like the motor on, but, I didn't put the $$ into the suspension to make it right. Even so I was thinking of raising the bars and dropping the pegs to make it...

Hello. It is possible to fit a complete electrical system from a -96 501 on a 400 -01 engine? On the new engine i have the flywheel and from the old one the stator and CDI I am bying a 01 400 engine and are going to mount it in a older chassi and have the CDI and stator from the older bike...

Hallo. I'm thinking to start riding enduro and are looking for a bike, and find a very nice very low hour 02 fe501 bike, look like new and its true.Read 15-20 hour. never worked on since new. I have looked so far after a 450 04 and newer before but now when i found this bike i got very...

I'm wondering if there's a way to fit the newer (2004 and up) clutch basket and plates onto the older (2002 FE501) engine. The reason I ask is because I want to put a Rekluse Pro on my bike, but they only make it for the 2004+ bikes.

Graphics aside, the frame and plastics on my 2003 FE400 looks identical to a newer 450. Are they? The reason I ask is although it is fairly easy to find replacement plastic, graphics, rad guards, skid plates...for a newer 450, 400 parts are hard to come by. Is there any cross-compatibility...

hi everyone, i have owned my SM converted 501 FE for a year now and have done most of the maintenance myself and i enjoy every minute of it, by the end of this summer my engine will be due another rebuild. could anyone out there tell me whether a newer (maybe '05) 550 engine would fit straight...

I've been keeping an eye on these bergs for some time, but I bought a new Husky TC450 earlier this year because of the price and great reviews, but I still feel the FE550 is better suited for my type riding and I wouldn't mind having one in the future. I've read of one or two more recent...

i love the look of the newer rear fender/rear numberplate panels - has anyone tried to fit on an older 'berg? i don't mind fooling around with it a bit to get it to work, just want to know if it would be close enough. anyone try it yet?

Looking at possibly taking the plunge again on a 450 Berg & was wondering what the good & bad is with the 2005 & up year model Bergs? I'll be riding an occasional hare scramble & play riding as well as doing some MX track practice days. I'm on the east coast & the terrain here is not that wide...

What does it cost per hour to run a 05 or newer FE650E. What is the maintenance schedule consist of Cost if you do it your self Cost if done by dealer Thanks Frank

what do you guys think here?how many hours of use before it is time to change out the rocker arm on 2004 and newer Bergs?i am not so interested in who flogged their bike the longest before changing them.rather,what would be a prudent amount of use relative to routine Berg maintainence.i had a...

The weakest link on my 2002 501 e-start system is the sprague clutch (free wheel mechanism). You know, hit the e-start button if the motor isn't completly warmed up and hear the starter motor kick-out and spin freely without turning the bike motor over. I replaced the sprague clutch itself not...

I know that the smaller motor is the Mitsuba SM-14 and I am looking to know what the larger, "updated" model is... Thanks a bunch!