This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mounted

  1. C

    Upper / battery mounted chain roller on 08 FE 550

    Hi, Came back from a trail ride and noticed the upper roller that is sandwiched between the frame and battery basket is missing. No worries, check the manual .... can't find the part on the pages for either battery basket or frame parts. The drawing doesn't show it. There's a part...
  2. polska

    Remote mounted oil filter

    Has anyone ever done this? Or wants to do it? More oil capacity and cooling as well. Something like this? But a filter. I also want to do wet ignition at the same time, so I would have about 3 liters?
  3. M

    Where is the horn mounted? FE550 2007

    Hey everyone, Need to get a horn mounted for Rec Registraction on my '07 FE550 But for the life of me cannot find where it's meant to go. I've looked through every manual and although they show wiring diagrams there is no manual which shows where the horn mounts. Furthermore the...
  4. K

    Triple mounted indicators

    Has anyone done this? Or tried their forks? I've installed a KTM '08 headlight so there isn't anywhere to mount new indicators. I found some triple mounted ones on motostrano but they aren't going to work due to the angle of the bolts. (and motostrano are useless) So I guess the only solution...
  5. H

    Rear Mounted Fuel Bottles

    I thought I would post a couple of pictures of my newly installed "get out of trouble" fuel pods on my 570. I figure the fuel these bottles hold should give me about 15-20 miles extra fuel for those situations where the ride is a little longer. I didn't want to install the subframe fuel tank...
  6. ktmbigfan

    Handle bar mounted hot start.

    Has any one mounted one of these from another brand. It seems they all mount on the throttle side as to keep your hand from twisting the throttle. This could get tricky with E-start button. Dumb question: Does my 08 450 have an auto decomp or just the manual one?
  7. R

    replace bar mounted electronics

    one of my infamous loop-outs took it's toll on the bar mounted electronics and i need to replace them, i thought about the OEM stuff but decided that i really would like it to look cleaner. not have those ugly red buttons and the bulky bar mounted control for the computer. is there not an...