miss

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    04 450fe High RPM running poorly. Video Included.

    Hi All, After getting spark on this bike it started and idles well. It now has another issue. It wont rev up and stumbles and backfires at mid to high rpm. When this happens it smokes out of the carb and stalls. Included is a video of the bike doing this. The carb has been gone through and is...
  2. C

    650 engine miss firing.

    Hi My 650 is has developed a sudden misfiring problem, unridable. It feels like a electrical problem and not a carb issue as it was running fine then started misfiring a lot. . The bike did get wet just before the problem started. I have checked all electrics and they seem dry.Any suggestions...
  3. T

    Miss shift and metal fragments

    I had a fail shift riding in heavy sand the other day and found this on my drain plug. i was shifting from 4 to 5th i think and it did not catch the gear engine reved up and wam slamed back into 4 This is an 1/4 inch 8mm socket beside them. could they have come from the fail shift...
  4. M

    I miss my Berg!

    What can I say....I miss my fricken bike. This working for a living sucks.
  5. velosapiens

    anyone miss me? accident report...

    i know the board has been suffering in my absence (lol). sorry to let y'all down. it's my first day at work after a memorial day accident (compound fracture of the femur). if you're bored, check out http://www.motosapiens.net/brokenleg.html for the full story, and preop and post op xrays. it...
  6. H

    2001 - FE400 Engine Miss

    My bike has develop an engine miss from 1/3 to full throttle. It seems like its overfuelled and is running rich under this operating condition. Similar to running the engine when its warm with the choke on. I've checked that the choke isn't partially stuck on. I've pulled the carburetor...
  7. D

    Miss around 9000rpm

    I just threw my bike on the dyno for the first time since fixing the motor and once i hit around 9000 (maybe a bit before) it starts missing, its not the rev limiter but is distinctly cutting out. I would have never noticed this riding it cause i never rev it out that far, but it didnt do this...
Back
Top