mid

So it turns out that although the exhaust sounds good, the mid pipe touches the fuel hose inlet that goes into the carb.... All sorts off issues with that Where it goes 2 in to 1 is further along the pipe then where it should be. So annoying, only just got it and only test drove it once. Re...

Hi does anyone know if a fmf mid pipe will fit between a akro header and end can, I'm sure I have read a few people have done this because akro didn't make a mod pipe for some reason Cheers Sent from my SM-G950F using Tapatalk

Hi guys my name is Ray I'm from Australia and I recently took ownership of an 04 FE650 with just 51 hours and 2600kms on it. It did however have a flat spot down low in the revs. After inspecting the carb I found that the accelerator pump nozzle was blocked, after many hours of trying I could...

The Mid Pipe on my bike is worn paper thin where it slips in to the muffler. Does anyone in Australia know where I might get a second hand one or has anyone had the same problem and had it repaired.

Trying to remove the mid pipe on my 11' 570s so I can get it ceramic coated but for the love of God please tell me I don't have to move or remove the motor! I have removed the head pip, have the bike completely stripped down, and removed the rear shock and still can't get it off. Does anyone...

HI Gents, I have squashed my stock header below the mid pipe real good and also where the mid and header join is well out of shape. I have googled my *** off (eyes are burning) and cant seem to find a FMF megabomb header and mid for the 2012 570. All sites saying 09-11 including FMF site? I...

I thought I had everything worked out. Bike (09 FE450) was running very well with the new fuel pump. Then 4 hours into my last enduro, with 2 hours to go, the bike starts bogging when rolling the throttle. It was more or less random, lost a few minutes here and there, and got stuck on a simple...

Performance Coatings in Auburn, Wa did this ceramic coating on the head/mid pipe for me. Works as good or better that wrap and doesn't rust the pipe out like wrap will over time. No clearance issue either as with wrap. Ti satin color - $135 for heat shield, header/mid pipe.

Hey guys, I just signed up since I purchased a closeout deal on a 2010 FE 450. Great bike, but I am having fuel boiling issues also. I had the 70 degree subtanked installed by the dealer. I personally pulled the tank afterwards and put heat reflective tape on the underside of the tank. Now, I...

[youtube:9f9p2rpj]http://www.youtube.com/watch?v=i-SXoX5tsLA[/youtube:9f9p2rpj]

my jetting is the stock needle, clip is 4th from top, pj is 42, mj was 175. Fuel screw out 2 turns. I run at 4000 ft elevation, temps 40-80F the bike starts easy, runs smooth and is a dream. SO sunday I'm riding and we stopped alot, maybe I let the bike run too long too hot and about half...

Last wknd was a good one for Husaberg riders. We had 4 riders in the top 20 overall. Two in the top Ten. Local Husaberg dealer CycleSport USA helped promote the race and had a great turn out. If you get a chance you should come ride some of the Mid South events. JEFF CREGG Suzuki 006 4...

I think I'm having a bit of a mid life prices. :( 1 sump plug - £12 2 rocker bearings - £34 2 rad shroud decals - £20 1 air filter - £8 not forgetting to add 17.5 pence per pound to keep the tax man happy. I can see owning a Berg is going to be a love - hate relationship...