mechanism

On a 2013 TE 250 installing the right side cover prior to the clutch cover there are 2 moves by hand parts behind the power valve area. I can not find any pics or how to align these 2 parts so cover sits properly.

so i was kickstarting my bike this morning, and right as i gave it a nice big wallop it kicked back hard and now the kick starter is limp and the pawls or ratchet or whatever wont engage! any advice as to my next step? i imagine its going to mean removing the clutch side cover to access the...

Hello, I am looking for the complete auto-decomp mechanism for the head of my 91 501. I also need the cable from kick starter to head. Anyone have one or know what other models mechanism would fit? Thanks

Hi! I have changed the kick axle and I am now not sure how to engage the clutch in order to get the exact cam position vs piston position. Se picture. The obvious answer is to place the dot on cam gear in between two dots on main gear. The kick axle retaining the arm engaging kick gear is...

like a venus flytrap! where do you hook the spring? do you/can you preload the spring? so you pull the idler gear off first? what angle the kickstart decomp arm? cheers! Taffy

Chasing a throttle mechanism mine broke where cable comes into the handpiece before the throttle tube etc. Anyone know what I can use apart from original. Any help would be great :P

Hi folks, I have seen a number of comments about needing to get to the gear selector mechanism and clean it up once in a while. My 650 gearshift is starting to get quite notchy and tight - is this the symptom? If so does anyone know of a link to a technical "how to" write up? I have...

I have a 2003 FE501E which I always start with the magic button. On the ride on the weekend I had to zip tie the kickstart in to frame as it was flopping out and snagging my leg. At the time I thought it just wasnt engageing the nylon plug that it rests against but closer inspection after ride...