mechanical

Recently when riding when i go to down shift i will get a bad backfire thru the intake and the bike will then try to die. never ran in to this kind of problem before and i am stumped TIA. 2011 husaberg FS570 dyno turned aftermarket filter full akrapovic exhaust

Hello everyone , hope you are doing well. About two months ago i bought a 2007 husaberg FS 650 E , in good condition at a seemingly good price . Not gonna lie to anyone , it was my teenage dream this bike so i'm pretty stoked. The bike was in good nick over all , no accidents or damage...

Hi again folks. I also have machined some mechanical timing chain tensioners. If you are interested. https://www.motoren-israel.com/Husaberg/Eigene-Produkte/Mechanischer-Steuerkettenspanner::202040.html Thank you for your interest. Greetings from Germany

So like an old love affair that just can't let go I bought a 2007 FE650 with 14 hours on it It was recently cleaned and new battery but then sat for a few months until I picked it up. It starts with a few pumps on the throttle but then dies right away. I think the jet is plugged??? I also...

Hello Gentlemen! Knowing of all the Berg professors out there I am scratching my battered head; I have a "sound problem" with my old 2001 550 stallion. After I ad to change the engine block of my trusty 550 fc 2001 berg to a 2003 block (bought from Taffy, thanks man!) I put all the internals of...

Hey Berg Owners, I want to help with tips online for your Berg 2001 to 2008, i once got heaps of calls asking for help to keep these sometimes troublesome motors going when i was an active dealer and ive noticed lately that the calls for help has died off since i ceased as a dealer in 2008. Even...

OK guys this has been too long and costly and i need your knowledge on how to fix it, if you figure out the solution and it works i will paypal you some money for your time. 8O So the story: :arrow: i bought a 1999 fe501 from a friend friend that was moving and had this bike sitting in his...

do broken valve springs deserve red alert status? http://www.husaberg.org/index.php?name= ... pic&t=8968 ever seen a tappet locknut that can move laterally 1mm before? http://www.husaberg.org/index.php?name= ... pic&t=9014 did you know that virtually all our linars are technically junk...

you're rebuilding the LHS cover of your engine and you need to tighten the gear nuts so you use the half spreed shaft as a lever, a place upon which to rest your bar? second scenario you put the two nuts on the two gears the wrong way around so the recess faces up. next thing you know...

does anyone know how to set the timing on a 98 fe400 thanks