master

Hi guys I'm working on a hybrid ktm rfs where the deck height isn't matching up enough to keep the timing chain tight. I was told the berg parts will fit and are a different pitch 10mm instead of 8mm on the ktm. If true it would give me the extra length I need on the chain. The parts fiche...

Hi Guys, Well i discovered that the strange things my clutch was doing is because the master cylinder bore has some of the anodising flaking off. This is allowing fluid to leak past the piston as well as wearing out the piston seal. Short of replacing the whole clutch master has anyone had a...

Hey guys, I've recently installed a 4 pot beringer caliper, but have the original husaberg brake line and reservoar. they bite ok, but I have no problem pulling the lever all the way in to the handle bar Will just upgraded brake line make it better, or should both line and reservoar get...

What is your favorite rear master cylinder guard?

Hi all, Has anyone done a rebuild on the master cylinder on the FS, separate fluid resivouir. Where do you get parts? I have tried munn racing been good in the past with the parts fiche but they dont seem to do husabergs any more? Also how do you get the piston out of the housing? There...

G'day guys, How would the Beringer 4 piston caliper perform with the standard master cyl compared to the standard caliper, or with the Beringer master? Thanks guys.

Hi All, I'm wondering if any of you might know of a aftermarket Front Master Cylinder rebuild kit for a 1996 FE600? Any help is appreciated. Thanks!

Hi all, The levers on my berg are doing my head in, they are loose and vibrate around. I've tried tightening up with no joy and even tried putting in a thin washer. Although they are made by a de net manufacturer I think they look s bit naff! Has anyone put aftermarket ones on? Are there any...

Swedish made.As old Husabergs do. I bought it second hand from a Suzuki B-King owner,it didn't match with the rest brake system of his bike. You can adjust power level and grip reach while driving,no tools needed. ISR finally meets Berg,her family. Part number 21-012-OA(Right Hand)...

My rear brake master cylinder seems to be missing the little clear cover that is supposed to be over the fluid. The rear brake is still working, so I am confused as to how it is working and what damage could be caused. What do you think I need to do, and can I source one of these cover/caps...

Anyone know where I can get a rebuild kit for my rear master cylinder or part #. Its a Brembo and it says 8444 on it?

Just food for thought. I have noticed over the years that allot of issues with pressure loss while bikes are in storage. I have a thought that might be onto something. While looking at the bikes parked in the shop I came across something interesting. I walked over to each machine that was...

Hey all, My 07' is not exactly stock;). Is there anyway I can tell the front master cylinder diameter from the outside, without measuring the bore? Thanks!

Hey guys, Had some trouble finding gears last night on the way home..when i got home i discovered that the clutch master is leaking from the plunger/piston area on the master. It looks like its been leaking for a little while but i hadn't noticed it. Anyway, i checked the fluid level and it...

Hi there, I have a question regarding the clutch MC on my 570, I couldn't get the answer on the forum (all posts I found were about the slave leakage and O ring issues) I am willing to replace the clutch MC in order to have lighter pull, and to match the nice look of my rcs brake MC. I was...

I'm looking for a rebuild kit for my clutch master cylinder, 2002 501E. I can't find parts for this bike anywhere. Everyone has parts from 2004 on but not before. This seems like it should be an easy item to find, maybe there's a KTM part that will fit? If anyone has any ideas where to find...

I'm looking for a rebuild kit for my clutch master cylinder. I can't find parts for this bike anywhere. Everyone has parts from 2004 on but not before. This seems like it should be an easy item to find, maybe there's a KTM part that will fit? If anyone has any ideas where to find this part...

OEM Magura clutch unit in my FE390. Master leaked. Replaced piston with OEM repair kit. Topped up with mineral oil. Bled. Still leaks. How can I tell if it is the Slave O ring problem, or a bad master cylinder bore? There's lots out there on this, but I am thoroughly confused and...

I have had the berg for a year. Love it, but it came with a slight drip that manifested itself on the bolt of the clutch leaver. Traced it to the master cylinder where the plunger/piston enters. Replaced the plunger after cleaning all parts. To the eye, the bore looked good on the MC...

Brand new Magura Clutch Master Cylinder-9.5mm KTM/Husaberg Part#50302030300 Includes break away lever. Fits many KTM and Husaberg models. Retail price is $323.99 Asking $175 or best offer with free shipping in the United States. PM or EMAIL