mapping

Hi guys, I own a US spec 2011 FE570 and I'm trying to find a source to correct the lean fuel mapping. Bazzaz apparently has discontinued their FI programmer. I'd be thrilled to send my ECU off to be re-mapped if I could find a source to do this. Any help would be appreciated. I'm open to...

Hi All, really hoping someone can chime in with some advice, I have an 09 FE 570 that has been converted to a snow bike, so lots of full throttle running. In an attempt to get more power I have done the seat mod and added an Akro slip on. Will the stock fuel map be ok? I know there is an O2...

New guy on the block. I had a KLX400 for about 4 years but never rode it because it was an unpleasant experience riding it to work and I didn't have anybody to ride with. Every time I DID take it for a run, it cost me $100 because the battery was invariably flat and had destroyed itself...

I'm converting my FE570 to FS. What map should I load on to the ecu?

Hey all, Been lurking around here for a while and just about to go after a FE570. There are a number for sale here in Aus some with and some without the three setting map switch Im just after some feedback as to whether they are of use or not. would like to here from those who do and...

Hi all, I'm new to this but can someone answer a mapping question for me. I have an 09 570 with the oem 10 clicker mapping dial. My question is, what number is what. I have read that 1 is stock and 2 is wild and the rest is variations of mild? Also my eyesight is not brilliant but how do you...

I just bought a 2014 FE350. Does anyone know what mapping is stock? Is it the same as 2013, or did they upgrade the mapping to the EU version or something similar? Thanks

Where can I send my computer to get the Eurpean Mapping programmed. I live in Arizona.

Hello guys! Short backround: My name is Kristian and I´m from Sweden. I´m new here and new with Husaberg. I bought a FE570 2012 about a month ago., been driving mostly Ktm before. Totaly newbie on EFI bikes.. I´m building the bike for icetrackracing, like supermoto on ice. The studded tires...

has anyone found a mapping/diagnostic sotware for re-mapping both the ignition and Fi on the Husaberg? I believe that there may be an Australian company doing this? I guess Vortex come into it? I'm looking to get more involved in this now. regards Taffy

I got a hold of a full exhaust for the bike and am thinking of getting it mapped for it somehow. What are my options? I know that tuneboy hasn't got anything. JD jetting, experiences? What else are there out on the market? I would love to be able to have 2 maps, one for the open system and...

Hey all on the stock rotary dial mapping switch what is what ?! I'm also looking at a sliding switch replacement and am too tight arse to fork out $80 Odd dollars on a trailtech one that will most likely seize. Does anyone have a wiring diagram for a sliding switch and which switch to use ...

Mine has the stock mapping and I keep hearing about this competition mapping or Euro mapping?? I called Malcolm Smith Motorsports in Riverside and they said NOOOOOOOO!!!! Told me they are not allowed to do that. What do I do? I've heard the comp map runs richer ie; bike cooler. Thanks, OB...

I've seen allot of discussion here and other web sites about the mapping switch. Some are at a difference of how it works. My question is: If the bike has the dealer installed competition map and no map switch is it in the more Agressive mode, (the same as with the switch and set to the...

I have the 10 position mapping switch fitted (3 settings). This is a bit of a fiddle to use so I was thinking of installing the trailtech thumb operated version. My question is do you need to turn the bike off inbetween for the different maps to take effect ? There seems little point in fitting...

I know this type of topic has been discussed over and over, but after searching all the threads I could find I don´t have a good answer for what follows: Just got my 570 about 2 weeks ago. It does not have the power I expected (my KDX200 has more grunt and topend) and seems to be running a bit...

Hey guys, I'm posting this incase someone can benefit from my experience. About three months ago I bought a new 2010 FS 570.Being my first berg, I was obviously very happy with the bike but as I got used to it and got the chance to ride it more often, I didn't feel as though it was running as...

Hi All, To enable the 3 different mapping options on a 390 Berg is it just a matter of fitting one of the mapping switches ?

Bought the Husaberg mapping switch. Is this just a 'plug and play' switch to access the 3 settings or does the dealer have to 'flash' the 3 settings into the EFI before installing the switch. Not sure what my dealer has done and I'm getting little support from them.

I looked in the owner's manual and could find no mention of octane or what fuel to use. So - what is the official recommendation? A related question - if you have to run lower octane than recommended, will any of the mapping positions be better than others. I ask this in case I am ever in the...