make

I would like to make my 2003 470 as quiet as possible. Any suggestions?

do they make a fe390 big bore kit? where?

I'm looking to convert a dirt bike to a street legal dual sport/ supermoto, the Fx450 caught my eye as one in my area appeared for a good price with a few tasteful mods done to it. I figure I need a speedo/tach, dualsport kit from sicass racing, radiator fan, and some more street orientated...

Hi guys! I understand this forum is full of expertise so i hope i you can help me out! -A month ago i bought myself a 2001 Husaberg FE650e, FINALLY! The engine was sent to Taffmeisters for rebuild and tuning in 2012 - 2 owners ago. The engine is hard to start on the kick, because of the high...

I have been looking to make my new Hussa FE 450 Road legal, this is the american version so it did not come with the turn signal switch on the handle bar. It does have the low/high beam and horn switch but no horn. Also has no ignition key. I have been looking at the Tusk Enduro wiring harness...

Hi to all! Just a quick few words. I had 450 sxf, bondi did performance mods. It was raced then I bought it. Turned it into woods trail bike. Put in heavy flywheel. Slowed it down with sprockets. Put in enduro piston. Was still the most expensive power compared to all the bikes in our group...

Ok, I'll start by stating the comments below are not meant to offend or cast any particular aspersions or even opinions on actual bikes for sale or the descriptions therein. That said, a couple of things crack me up every time, to wit: Mechanic owned = Damn, I'm tired of working on bikes...

Hi folks, I have an FE650 that I can hardly use because it is no noisy. I don't worry about it myself but neighbors would call the police.... Last time I took it through town I got the police on my tail... Over here you are not allowed to ride in the woods or the outback so making a lot of noise...

So which parts of the bike results that much weight compared to the old berg and the other competitors? Which parts are replaceable to lighter components (alpina rims not an option)? I don't see anything to make it lighter just make tubeless wheels, battery change and maybe to change the...

Hey :) I've seen so many people restore their old bikes so nicely, make them look practically new again Now i'm not quite going to strip down the whole thing, but how the hell do people get it so nice? I've hand polished a few things like my wheels with Autosol but it comes out no...

had a potential new customer quote back to me all my prices in an email. all the parts were for the 1996 era and I didn't recognise them off the top of my head. so I said " yeh, that sounds about right, so 50quid please?" no reply so I checked today and he's been and converted the prices...

70 degree here, I have this new coil. The coil came without the spark plug cap. If I pull the old cap off will it be ruined? Does it grab the wire such that it cannot be pulled off? TIA

Well, I think some might find this somewhat interesting to read, and it's good to collect all the info and pics in one thread so here goes nothing. Back in -11 I wanted something different as I was thinking that bikes (sportbikes) are too boring, and I was desperate to choose whether to try a...

Hey all, don't know if its been done before but here it is- Its a controller knob from an electronics store super glued to the stock numbered dial on the stock mapswitch. It was a "meant to be" kinda fit, and the dials should be universally available. The rubber housing has been cut to allow...

Can anyone tell me if installing the FMF Q4 exhaust on a FE 390 will make a meaningful reduction in the noise output?

Hey guys, new rider here (Canadian living in Iceland) with a 2008 fe450 having lots of trouble finding a replacement lever for the front brake... Long story that starts with me ordering from http://www.midwestme.com/pages/product.html thinking it would work. turns out this lever does not...

I have a barley used fs650c but want the offroad suspension and tires. I have a guy with a 2011 fx570 and was wondering if we could swap forks, shocks, front brakes, triples, and wheels. does anyone know if we will run into problems.

hi. im putting my husaberg together, got the new parts today. I had a problem that 2 of the shift drum pins were loose and they broke position star. Now i dont trust that pins would stay in its place only by pressing them in and position star on. Does the position star really lock them in or...

Picture this, saturday afternoon, dry roads, ZX10 trying to play, stuffed him on the inside going into a roundabout, then blatted out and past the traffic, hit top gear then............. Nothing, engine detonated, no drama just dead. Clutch in, coasted into a lay by, stepped off the bike...

My manual doesn't say - I'm guessing Magura? I have a nice new set of EE handguards that aren't fitting my '10 FE450, but they'll fit my KTM - part #50-5137S for Renthal and Neken fat bars.