magura

Hello Husaberg Forum The Clutch on my 07 FE450 is getting lazy.. is not fully disengaging.. so i'm going to start of by bleeding the sistem .. with mineral oil.. would you think 10W fork oil could also work?? ( its red and mineral) Thanks guys Vasco Lisbon, Portugal

The seal on my slave cylinder is leaking and needs to be replaced. My preference would be to rebuild it while there anyway but I cannot find for sure a rebuild kit. On Amazon, I've found a ktm 9.5 magura rebuild kit but its indicating that it would not fit my 2011 FE570. My magura is a 9.5...

hey everyone, was wondering if it is possible to replace my whole magura clutch system(master and slave cylinder) with a brembo system on my 2011 fs 570? Im tired of the magura leaking and not working properly and the brembo system on my KTM has had no problems so i would just like to switch to...

Hey guys, Had some trouble finding gears last night on the way home..when i got home i discovered that the clutch master is leaking from the plunger/piston area on the master. It looks like its been leaking for a little while but i hadn't noticed it. Anyway, i checked the fluid level and it...

Does anyone know if an bottle of Magura blood (brake fluid) that's been open is OK to use later ? I know brake fluid Dot 3,4,5 when open shouldn't be used later.

Hello, I want to ask if I could change the pump connector Husaberg FX 450 2011 Magura with pump KTM SX 250f 2010 Brembo? Will it work? I am not happy Magura changed entirely in upper pump handle checked whether the lower pump misses everything was fine and still drive like a time waste heat...

Brand new Magura Clutch Master Cylinder-9.5mm KTM/Husaberg Part#50302030300 Includes break away lever. Fits many KTM and Husaberg models. Retail price is $323.99 Asking $175 or best offer with free shipping in the United States. PM or EMAIL

Magura radial M/C, speedo sensor, brake hose, stop sensor. Caliper, fork leg, brake disc are now SOLD! Open to offers for remaining stuff: M/C 81713001000 + stop light sensor 81711050000 Brake hose 81213012000 speedo sensor cable + magnet 80014068100 + 80014069150 / 0471009104 Complete...

SOLD Magura Blue Clutch Levers-Part#7800293110068 One brand new, one slightly bent at the tip but still usable. Fits Magura clutch on 2009-2012 FE/FX 390/450/570 Retail is $39.99ea. Asking $35 or best offer for the pair shipped in the US. PM,email me, or send PayPal to [email protected]

I converted the clutch on my 01 to a left hand rear brake last winter. I used DOT 5 silicone fluid and it has worked great. Of late the brake has been acting up with the lever going from normal to spongy to rock hard. I've spent a couple evenings trying to solve the problem to no avail. Tonight...

How do I remove the piston from the clutch master cylinder? There is a piston repair kit (50302032100) I can buy but I can't figure out out to remove the old one? There is no circlip. Help?

Do you guys know what clutch lever is stock on the 2010 Fe450/390/570.I came up with three levers (short 123mm polshed #20-0723121) (Long lever polished 20-0723290 146mm)and their is a black 163mm #20-0723296. I believe the stock lever is the short 123mm and its to small for my big fingers.Has...

whats the closest bend of pro taper models compared to the Magura? I have now pro taper contour factory Suzuki / KTM stock bend, and I'm looking something a bit wider and maybe higher. My stock Neken is all twisted so it's no use for me anymore. I'm 182cm

Hi fellow berg owners. I have to replace the o ring in the clutch slave cylinder on my 09 570 so will be needing to refill and bleed the hydraulic clutch but the oil from the dealer is expensive $38 for 75ml, are there alternatives to using this oil, will any mineral oil do the job

Hi, I have a 2011 Berg 390.. Any body knows if SUNLINE V1 flex levers comes for Magura / Husaberg clutch levers ??? I bought a SL V1 lever for a 2007 KTM Magura clutch and they are not the same, not fit in my berg.. Any advice ??

I just bought an oversize clutch mastercylinder yesterday from the big Magura suppliers here in the Uk named 'venhill'. you may have heard of 'venhill' cables etc. I mentioned that the M/C was going to be a brake M/C when fitted and she said that all she had to do was change the membrane...

Hello, my first post here, excellent forum BTW..... Although I already asked Taffy (and did business with in the past with great pleasure) for a quote on a new part, I'm interested if a 10,5 clutch cylinder (the thingie on the handlebar - excuse my english, its not my native) would fit and do...

Hello all, Does anyone have part numbers for magura hydraulic clutch master cylinder rebuild kit for 2002 FS650? I'm trying to find the part numbers, or place to find part numbers, and place to order those parts. Clutch master cylinder needs a rebuild and I cant find parts anywhere, or I...

I'm running a Revloc clutch and am using the mineral oil magura clutch master with a braided steel line straight to my rear caliper. I cannot, for the life of me, get this thing to bleed! I've tried reverse bleeding with pressure using a big syringe, regular bleeding, gravity bleeding, etc...

Checked my clutch fluid today and it looks like metallic silver paint. I want to flush it with new fluid and I'm not sure what fluid to use. I read about using a syringe but I don't understand the process and it sounds like it's an oil rather than a brake fluid. Any advice?