lubrication

So the engine is splash/bath lubricated. Primary gear, clutch, idler and kick gear on the left side of the engine, in oil bath. Gearbox on the right side also in oil bath and oil can flow freely between right and left side. Cam, rockers, valves gets splash lubed by the oil carried by...

This weekend I dismounted the cover of the cylinderhead an was astonished: The rocker arms are only lubricated by the oil of the timing chain. I now mny former 2001er modell, which has had a oil canal from in the cover up to the rockers. (remember the little o-ring seal ) When is...

the early berg lubrication system relies solely on a reed valve in the crank case that evacuates on the down stroke ,then it closes on the up stroke ,but any lubrication the crank receives comes from what little bit of oil the clutch can throw up toward the oil screen that sits at the top of the...

Mechanical Help wanted I don’t know what’s the matter with my Berg. The gudgeon pin of the piston gets worn out excessively. I’ve recently acquired a ’98 FE 501 E and, a few weeks ago, replaced connecting rod bushing and gudgeon pin because they were strongly...

Hi, Which models lubricate the conrod bearing through an oil duct in the crankshaft?

It appears that Husaberg have done away with the pressure fed rocker arm lubrication. Look at their oil circuit diagram on page 53 of the 2005 manual. It shows splash feed via the cam chain only to the cylinder head ! Remember the old RAL Husqvarna bikes of the 90's they didn't last long. I...