lots

good afternoon...I submit my problem, I hope some a good soul can help me..the bike is a 05 fs 650.. after the head recon, new valve seals, griding valves in the shop, new bering and head gansket..ecc..ecc ktm rfs hot cams cam (cutted) the engine starts only with the red knob hot start...

Hi guys. Bought a used 09 FE570 home. Kind of disappointed, I wanted to ride it tomorrow so I drop the oil and clean the air filter. Oil is very green lots of coolant mixed in there. I am hoping this is a simple fix like one of the water pump seals? I gave it a test ride before I bought it...

My bike is a 2011 FE570S with 87 hours and about 3200 miles, mostly off road at high throttle... This is what I had in my oil change this afternoon. Please note that there were metal parts everywhere: Oil plug magnet Oil screen near thew oil plug magnet Banjo bolt oil screen in the engine...

I was looking in my paperwork and I show that stock my main jet should be a 190, when I cleaned my carburetor I had a 200 main, the rest I believe were stock but cannot be sure about the needle jet I don't remember looking at it. anyways my bike runs good and doesn't (Backfire) or what I would...

Selling everything as a package. Two new sets of decals(one H-line and the other is a Blackbird kit, which is new in the package), new in package UFO radiator shrouds and rear fender, several extra plastics and spares. New chain, sprockets, grips, oil filter and husaberg backpack. This is a...

SOLD!

Christmas Lay-Away now at Reno KTM - NMS! Put 20% down and we'll hold your Gifts until Christmas and WE'LL EVEN WRAP 'EM FOR YOU! We are an authorized Husaberg Dealer. The perfect gift is a new Berg!!! We also have Husaberg backpacks, jerseys, bike stands, shirts....if we don't have it in...

Hi all. The following happened to a 2001 FS650E. On the way home (fortunately) I went from having a very nice ride to hearing something bouncing around in my engine. Tink, tink, tink a tink, tink. Like that. I immediately pulled the clutch and let revs drop to idle. Bike idled fine...

Last weekend I raced my buddy out in the desert, and in fifth gear my '06 550 obviously pulled ahead of his 450 yamaha, but when I hit sixth the smoke screen started and she started cutting out. This little race was about five minutes after twice attempting to climb the biggest desert hill I...

I have bought a kinda cheap FC550 '03 engine lately. The owner mentioned in the advertisement it needed a new Big-end. In this thread I will describe the rebuild of this engine to use it in upcoming SM season. (in my current bike I have an '02 FC550 engine which will be replaced by this one)...

In the great Aussie tradition of disposing of a worn out rear tyre. Whilst mid burnt out a large amount of smoke came from the exhaust, After inspection the compression seems OK. but there is a heap of oil in the frame / air box. How is it so? should I be really concerned?

hello people im new 2 this site and need some help! i was out on my bike about 5 hours after pickin it up and sezzed! witch was my falt as i was goin flat out and i was holdin it there! now i know u cant do this with these bikes and i wont do it again! it up it did unseize but now belows...

http://www.epifumi.com/foro/lofiversion/index.php?t2928-0.html To translate, go here, http://babelfish.altavista.com/babelfish/tr

Hi, I joined the ranks last week. I need to convert my race bike for street now. What DOT 16.5 inch front tires exist ans where can I get one in Canada? I have a beringer 6 pot with no pressure switch for brake lights, can I just change out the banjo for a ktm unitized pressure switch...

well dropped the oil on the berg last week and got a shock lots of what looks like bearing material on the sump magnet, small shiny slivers of metal. 8O got to say the bike has had a hard season and a half but the valves are checked ,and its oil dropped every second ride .ive got three good...