lost

After quickly installing a new battery I have lost all power. Blinkers dont work, dash is gone and starter shows no signs of life. I didnt "properly" tighten all the battery connections, just enough that they wont fall off. Once I tried to start it I heard a click coming from the...

Hi, under the headlight there is a 6 pin connector that gets some if it's wires from the Key switch. This 6 pin connector is capped off with a male connector that has wires that cross over to make connections with wires within the connector and it is heat shrink covered. It leads nowhere...

Hi guys im new. Took my 09 te 450 for a second ride and the fuel pump stopped and i got 4 long and 1 short blinks. Put a multimeter on the plug and 12v but nothing will a test light... i assume dead ecu?? Wires carry the load fine, pump is fine. To get home i put a jump wire into no1 fuse and...

Hi all got a problem started to overhaul the starter got the collar out to change for a new one pushed new one in turned my back to get my hammer and the bloody things gone I assume its fell behind flywheel got my flexi magnet out but cant find it anywhere!! Flywheel turns fine question is will...

Hi all, I was riding my 2010 fx450 on the single trails with my brother yesterday in the Wombat State forest here in Victoria. Between trails we sometimes have ride down gravel roads that may also include a bit of a drag race. Yesterday's drag race saw me going a little too fast for the corner...

I have a 2011 FE570S. The headlight and taillight stopped working so I replaced the #3 fuse which was burned out. When I went to turn on the ignition switch the running light flashed and the whole bike lost power. When I turn the ignition switch I get absolutely no power. The bike does nothing...

well as it says in the title .. im sure you've figured it out ... picked up my first berg yesterday, an 01 400fe frame with a 501 engine ... in great condition, and what can i say ..... its a whole lot of fun !! oh and hey my names luke !

Hi guys. Bike in Question is my 05 FS/E 450. I've experienced a glitch to the norm "slack clutch feel" issues. I have my suspicion but, thought I'd ask first. First. From day one, Owning the bike. The bike had a lot of 'Clutch drag' I figured the Discs where close to being replaced, so lived...

Last sunday at a New England hare scramble event the local offroad community lost a great friend and competitor: 57 year old John Ruffo. It was the first race of the season here and John was excited having just bought a FE250 to compete on in the NETRA and JDay super senior classes. He was...

https://vimeo.com/41634859

While riding over memorial day my 2002 FE 501 was making a louder than normal clanking valve sound, so I adjusted the valve clearances and it still made the sound. I rode it a bit more and all of a sudden the bike just died, no loud sounds just stopped running. I went to kick the bike over but...

2003 fe 400 starts 2nd kick- revs up fine,warm it up, click into gear let the clutch out and it stops. kick kick kick kick kick kick kick no start, get it back in the workshop and now it has no spark?! had a new stator in july and has done 10hrs (ish) since, had it tested...

I just took my 450 out today for a short ride as I got it registered street legal. Went for a short ride, came back home and realized that steam and smoke were coming out of the engine and exhaust..(piston, rings etc) It had probably 2hours after the last overhaul... The coolant was empty and I...

ILL GET STRAIGHT TO THE POINT WAS GOING ALONG IN 5TH GEAR AND WENT TO CLICK DOWN TWICE AS I WAS SLOWING AND WONT GO LOWER THAN 4TH GEAR.GOT HOME AFTER HAVING TO USE 4TH ONLY AND ABOVE FOR 15 BLOODY MILES.PULLING AWAY WAS FUN !!!! GOT IT ALL APART AND THERE WAS ONE OF THE PINS FROM THE STAR...

well this would normally be under race report but as you'll see i have a new thread here. i went to race today and was away nice and early befiore 7am. my trailer has a pair of cheap tyres which my ex-boss had put on for me. i had asked for HD 8-ply but got the cheapest pair in the UK called...

I've lost one of the two bolts (#15 on page 24 of 01 parts manual) used to adjust the rocker arm play. It came from the fact that the thread was gone, I guess, because the bolt would turn endlessly (swear it's not from me overtorquing, this time). How bad is the fact that I cannot adjust the...

Hi guys I have been blessed with a real nice 2003 650 fe sitting in my shop. The owner lost the ignition key and ordered a new ignition for it. When it arrived he took it to a dealer who subbed out the job. Now 8 months later the job is not finished and the bike was brought to me. There is no...

Looking for any info from you fellas on purchasing a brake caliper adapter to fit a pre- 98' Husaberg FE600 w/50mm standard forks. I've got a pair of 17" Hagon wheels with Talon hubs and a 320mm front brake rotor. The adapter has been lost in the mail after being returned to me from a no sale...