lobes

Hi, anyone can help me, what cam lobes sizes should be in my 2000 fe501. I have a problem. When i put TDC, set valve clearance (0,1), and turn cam, the clearance grow to ~2,5mm (on all valves). Do not see any significant damages on camshaft or arms. Any ideas? My lobes 33,4mm x 25,8mm...

2005 FE550. 3rd owner, 358 hours, 13000km, unsure when it was last rebuilt, or ever. I’m getting lots of metal sludge and shavings on my drain plug magnet and I’m trying to track down the source. The plug in the picture is after 1.8 hours (fresh oil) and there’s quite a bit of stuff on it...

Hello guys i own a fe450 2005 and i´d like to know if makes a differece if i would mount the rockerarm with the lobes pointing down,as the crankshaft makes a full turn and will compensate in one turn,am i right?bergy cheers

I'm replacing the timing chain on my 02 FE501 and I'm alittle confused as to were the cam lobes should be at TDC while hooking up the new chain. I've seen some cases where people have said to have the lobes facing up at 11 and 1 o'clock. I've also heard people say that the lobes should be facing...