link

ok guys ... experience with split links and rivet links ... who has used what and how was reliability ... then next question ... is where to purchase in uk ?

2007 fe550e piston inspection - tools needed I'm about to check the piston in my 2007 fe550e that has not been worked on since new. I want to get all the tools and parts before starting work. 1. Looking through the workshop manual one thing I am unsure of is whether I need to buy a new...

so to make a long story short, rebuilt this engine but re-used timing chain, just finished final tuning yesterday, 3-4 hours into its life the timing chain master link breaks, the lucky part---->no valve to piston contact, no gears damaged, chain not even damaged, was doing 60mph at 1/4 throttle...

I have both a 97 and 99 FE501 and I'm wondering why the engineers did away with the rear suspension linkage on the newer model. In comparing the two side by side the newer (linkless) version is obviously lighter, less prone to wear and cheaper to manufacture. But...is it better? Was the change...

Anyone got a link to a chart with ktm / husaberg spring rates etc. found one the other day but didn't book mark it and do you think i can find it again? just ordered a new spring. wanted the PDS10, already running a PDS8 shop sends me the wrong spring. Sales said no you've got the right one...

http://www.supermotojunkie.com/showthread.php?110814-2002-husaberg-fs-650-winter-rebuild what do you guys think so far

this link has been on a few boards, the quality of everything is very good http://www.actioncam.kuvat.fi/kuvat/End ... 3.2010.MOV

Like the ease of using a master link & clip, as shown in 'berg parts book, but not convinced how secure. What do you guys out there use ? Old chain that came on bike was endless.

Anybody know *exactly* what brand/model chain comes on the 2010 Husaberg FE 390? I want to get a master link or two for the fannypack. Yes, I've been all over the Owner's Manual, corporate web site, and spec. sheets - but they are all too vague. Thanks, homies! E-Ticket

How do you remove the link from the swingarm? I removed the nut and bolt (that goes through the swingarm) but the bearing spacer seems to be pressed in and appears to extend through the link into the other side of the swingarm. You can see the bearing spacer slightly protruding out...

Hi I fitted a new cam chain in a 470 can you tell me if I should use the rivit link or the split link which cam with the chain. The split link seems wider than the rivit link Ian

http://www.epifumi.com/foro/lofiversion/index.php?t2928-0.html To translate, go here, http://babelfish.altavista.com/babelfish/tr

http://www.motosapiens.net/random/force_ride_gps.zip this zip file contains: kane_amasa_pritchett.tpo kane_amasa_pritchett.gdp moab_trail_notes.txt the tpo file is a cleaned up version of my moab tracks. unfortunately there are a few bitchen rides that never made it on there. oh well...

Sorry to have to post this, but i am looking for a link that used to be in the left nav that contained advice on small things to do with the huabergs. As in, buying a porsche valve adjustment tool to adjust the valves, placing a small K&N filter on the crankcase breather and so on. if some one...

Double Backflip

am i the only one with the rear wheel all the way forward in the swingarm? the chain tension appears to be correct, but the 114 link chain with stock gearing has the rear wheel up far enough to rub the mudguard. it so happens that i have another chain (primary drive) on the kitchen table that i...

eBay UK link this is the link you should keep for checking out what we have for sale in europe. my german is iffy but ok enough for reading (with finger following each word....) so i'll try to help anyone if they care to PM me. i've already bid on something for fryguy but i won't say...

I've read the previous thread on this subject, but would appreciate any additional info as to the removal of the part of the susp. linkage that pivots in the swingarm. I've removed the nut and bolt, but can not remove the link itself. Are there any special methods/ techniques that would help...

I am trying to replace my timing chain master link the problem that I am having is the pins don't stick out far enough that I can stake them they are flush with the link and that is with the link pressed on so tight that it is in a bind I am using a motion pro chain riveter. could I have the...

The Cycle World thread has grown so large I thought I better put a new thread in with a link to the article. Cycle World Shootout